Forum Replies Created
-
Posts
-
Re: bosch wae 28464gb/05 clothes coming out hot
No, as soon as the water level drops and the pressure switch resets, it cut it off.
Edit: I found the ones i needed were 9 volt relays and not the usual 12 volt ones.
I got mine from RS Components, stock no: 683-9154Re: bosch wae 28464gb/05 clothes coming out hot
I’ve had two of these recently and both needed the heater relay changing on the pcb.
Re: Componant ID……
It sounds like its more likely to be a 470 uH inductor (choke) in which case the meter reading is probably correct.
Re: Problem with ASKO 20003 washing machine (drain pump)
Re: Card Payment facility incl terminal
Toni wrote:I have the EFT930G and i am not that impressed
I am only succesfull with about 1/2 the transactions. For some reason its unable to connect even when there is a strong signal.
😐Exactly the same here 👿
Re: Problem with ASKO 20003 washing machine (drain pump)
I would say the only way here is to hope someone has a board and can id the component for you, sorry.
Problem with ASKO 20003 washing machine (drain pump)
Sorry then I can’t be much help to you on this one
Problem with ASKO 20003 washing machine (drain pump)
Ah it won’t be the same then. The IRF’s are Mosfets.
edit..
What are numbers on the three devices at the top left of the board?Re: Problem with ASKO 20003 washing machine (drain pump)
It will be a Triac – probably same as the ones on the top in a row
Re: OK Jim, I give up, do tell?
Re: hoover HNF 7148 PCB
My guess would be burnt out pump motor due to leaking dispenser soap hose.
Power off when checking please.
Martin.Re: computer running slow
smeghead wrote:Treat your self to a Mac next time Martin- I did a year ago and have not looked back.
No viruses, no slow running, no hassle- just a super fast computer.
Clive.Completely agree here. I dumped windoze a few years ago for my main computer, and after using iMac will never go back.
