[MDE]

Re: ZANUSSI OVEN ZPB 1260X

Thanks Dave. That should help.
pnc is 9497122170/01 so should be same,

Mark.

[MDE]

Re: samsung Rs21dcns

Thank A1, one more thing, the evap cover I got from Connect was not a direct replacement, I had to take the connectors of the old one to make it fit, but it was the right part number, anyone got any thoughts on that ?

[MDE]

Re: Miele w460

Thanks Dave, I have checked the tacho, and the magnet and coil are ok, there are no broken wires in the motor harness, and the connections on the PCB and the motor are ok.
1. Is the rinse light flashing a fault code for a motor related fault.
2. Anyone got any other susgestions?.

Thanks Mark.

[MDE]

Re: Maytag aye2200agw Fan

Hi Spanner51,
The jubilee clip may have helped but i filed the shaft down until the fan went on without haveing to be forced and i thimk that is what made the difference

Hope this helps,
Mark.
[ And it took alot of filing]

[MDE]

Re: Neff b1691 odd fault

The voltage on the oven terminal block is constant so volt drop is not on the mains power supply, Its in the oven somewhere.
Thanks.

[MDE]

Re: MIELE W404

Thanks Seamy, I went back to try a bigger load on this but it made no difference, they are using it with the high water level buttin on at the moment.

Thanks Mark.

[MDE]

Re: Whirlpool ART 496nfv

Thanks for the reply Bob, I am going to look at this on Thursday so its something to look for.
Would anyone have tech info or diagnostics for this Fridge.
Mark.

[MDE]

Re: Whirlpool akz 195

Thanks for the replies guys.
It looks like it is the main board.

Mark.

[MDE]

Re: bosch sgi5345gb/01 sicasym

Thanks for the coding sheet Martin,I did the repair on Saterday all worked. But not a repair I like doing.

Mark.

[MDE]

Re: bosch sgi5345gb/01 sicasym

Martin wrote:

MDE wrote:
2- With this model number, do I need to do the wireing change
{I think I do but would like to know for sure}.

I doubt it but if you give me the 4 digit FD no I can double check for you while I’m at it. 🙂

Hi Martin, I went back and had a look but the FD no. has been wiped off and is not on it anywhere else. Is there any other way to tell.

[MDE]

Re: Bosch Maxx 6 WAE 24190NL/03

Some Aquastops have 2 valves in them, if one is gone you will here a buzzing sound but it will not fill.

[MDE]

Re: bosch sgi5345gb/01 sicasym

Me again
I have a coding sheet from another bosch module {p/n493323} would anyone know if it would be the same, the module looks the same. ❓
The earlier post I was referring to was [sgs4468gb/35] and it is in Trade Technical Enquiries,sorry don”t know how to link it.
Mark.

[MDE]

Thanks for the reply, sorry for not getting back sooner.

The fan is splitting all across the back,edge to edge. On the third fan I used a jubilee clip to ensure there was no movement on the shaft. The fans did take a lot of force to push on , but, I’ve never come across one of these that did’nt. I will try another one but this time I will try filing down the shaft a little bit.
Any more comments would be welcome.

Thanks Mark

[MDE]

Rob & Jim, Thank you both for the information.
Mark.

[MDE]

Re: SAMSUNG RS21DCNS

Phoned customer this morning and informed her about the 5 year warranty and she will get it done by samsung. Modest call out for me, so all happy.

Thanks for your replay
Mark.

[Author]

Posts