MDE

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 66 total)
  • Author
    Posts
  • in reply to: ZANUSSI Aquacycle Series FS1255W #236527
    MDE
    Participant

    Have a look for a track blown on PCB ,block with 1 yellow wire 6 red wires, second red wire from right, its going to number 3 on door interlock.

    Mark.

    in reply to: zanussi washer fs1155 door lock problem #235655
    MDE
    Participant

    Had same fault on same Mod. yesterday,track blown on PCB ,block with 1yellow wire 6 red wires second red wire from right, its going to number 3 on door interlock.Dont know if PCB can be fixed.

    Mark.

    in reply to: Whirlpool 3XLER5435HQ-0 Tumble Drier, #235360
    MDE
    Participant

    If i remember correctly the fan is a left hand thread.

    Mark.

    in reply to: Creda europa solarplus oven #235172
    MDE
    Participant

    Got another Mod no 48145 S also Europa solarplus built in and this is brown.

    Mark.

    in reply to: Whirlpool 3XLER5435HQ-0 Tumble Drier, #235356
    MDE
    Participant

    Possible dry motor bearing, have replaced a few motors for this.

    Mark.

    in reply to: Creda europa solarplus oven #235168
    MDE
    Participant

    Got this in a house today, Creda built in double oven europa solarplus.
    Mod E430EW

    Mark.

    in reply to: Whirlpool Top Loader not spinning #234564
    MDE
    Participant

    Hi Seamy,have a look at this site it should even have pictures.

    http://www.cheapapplianceparts.com

    Mark.

    in reply to: Belling 150 wss #234201
    MDE
    Participant

    Thanks a mil,will try that one.

    mark

    in reply to: Search UKWG #230592
    MDE
    Participant

    Re: Search UKWG

    kladave wrote: one more problem i have is when you enter a model it lists a certain amount of pages but i can only access the first page.
    i don’t want anyone thinking i’m having a good old moan here it’s just annoying.

    Someone said something about refreshing the page, to get to the next page how do you do this. : ❓

    in reply to: TYPICAL MONDAY #230178
    MDE
    Participant

    Re: TYPICAL MONDAY

    [quote can’t knock outer bearing race out…BER. richard


    knock out back bearing and drill behind bearing race at an angle in 2 places opposite each other [top & bottom or left & right sides ] untill you can hit the outer front bearing race and knock it out.

    in reply to: Belling IDW 603 #228272
    MDE
    Participant

    Thanks a mil for your reply, will have to go back and have a look.

    in reply to: SOLE/SMEG MOTOR CAN YOU HELP. #225501
    MDE
    Participant

    Its in Connect as whirlpool AWM329 motor,but not any cheaper.

    Mark

    in reply to: zanussi- electrolux d/w- model zsf6161 #224950
    MDE
    Participant

    Safety recall on this MOD. No. back in june, have a look at the NEWS ARCHIVE for more info.

    in reply to: Fault Code Guide #223198
    MDE
    Participant

    Would very much like this little book. But will you post to Rep of Ireland and if yes ,what will it cost and how best to pay.

    Thanks Mark.

    in reply to: Powerpoint washer-dryer 1200 IWD – need user manual!! #216452
    MDE
    Participant

    Sold by a company in dublin call showmar, I think spelling of name is right.

    Hope this helps.

    Mark.

Viewing 15 posts - 46 through 60 (of 66 total)