mikehha

Forum Replies Created

Viewing 15 posts - 151 through 165 (of 217 total)
1 2 3 … 10 11 12 13 14 15
  • Author
    Posts
  • February 25, 2015 at 5:31 pm in reply to: candy gv138d3/1-80 #424759
    mikehha
    Participant

    Re: candy gv138d3/1-80

    My original question was has anyone had trouble with door seals coming off. you said no, so I am looking at why it is coming off. hence bringing it back to the workshop and letting the girls put some washing in.If the seal stays on the hotel will be getting it back with a lesson on how to abuse no I mean use it. And as for poor quality domestic unit? you said that I didn`t.

    February 25, 2015 at 3:16 pm in reply to: candy gv138d3/1-80 #424757
    mikehha
    Participant

    Re: candy gv138d3/1-80

    hotel with a hairdresser and gym . Not used for the hotel side as they have two comercial lux m/cs

    February 24, 2015 at 5:26 pm in reply to: candy gv138d3/1-80 #424754
    mikehha
    Participant

    Re: candy gv138d3/1-80

    the original seal came off twice so put new one on and yes made sure that the clamping band was tight that too came off! the m/c is only three weeks old but because of where it is no gaurantee. m/c now back in workshop so we are going to test with our tea towles and anything else we can bung in

    February 22, 2015 at 9:46 am in reply to: candy gv138d3/1-80 #424745
    mikehha
    Participant

    Re: candy gv138d3/1-80

    OK
    8kg machine small load and guess what ! Yep the door seal has just peeled off the bottom of the drum. So I ask again has anyone else had trouble with door seals coming away.

    February 19, 2015 at 11:36 am in reply to: neff w5420x0gb/07 #424668
    mikehha
    Participant

    Re: neff w5420x0gb/07

    thanks for your responce martin but new lock fitted and operated by screwdriver but what I have found is I have a earth leak of 9.46 meg on the motor could this be the prob

    February 6, 2015 at 7:33 am in reply to: neff s72m63x1gb/44 #424455
    mikehha
    Participant

    Re: neff s72m63x1gb/44

    Many thanks Martin

    January 13, 2015 at 8:53 pm in reply to: bosch wta4107gb/01 #423571
    mikehha
    Participant

    Re: bosch wta4107gb/01

    Thank you Martin have ordered one from master part .should be here on Thursday.

    November 4, 2014 at 8:31 pm in reply to: neff s51m53xigb/14 door catch #421068
    mikehha
    Participant

    Re: neff s51m53xigb/14 door catch

    Catch sat in clips so can’t move also I have fitted a new one

    November 4, 2014 at 7:53 pm in reply to: neff s51m53xigb/14 door catch #421066
    mikehha
    Participant

    Re: neff s51m53xigb/14 door catch

    Decor panel off .m/c in middle of kitchen floor so cabinate can be moved but door hits small catch which I suppose is to release large catch but it seems that the door dosent go in far enough.

    June 10, 2014 at 3:30 pm in reply to: aeg pe9038 coffee maker #415054
    mikehha
    Participant

    Re: aeg pe9038 coffee maker

    Thanks for your reply seamy. prices for parts are a pit dear any ideals why it wont take in water.

    March 12, 2014 at 2:50 pm in reply to: hotpoint wmf 520 #410974
    mikehha
    Participant

    Re: hotpoint wmf 520

    thanks for your reples 1st the door lock is not trying to lock so bypassed it and still no go and 2nd yes have had both carbons out no broken wires in motor plug so me thinking its top control card.

    January 10, 2014 at 12:32 pm in reply to: siemens wm16s794gb/09 #407366
    mikehha
    Participant

    Re: siemens wm16s794gb/09

    front bearing outer shell cracked! never seen that befor.

    January 10, 2014 at 9:26 am in reply to: siemens wm16s794gb/09 #407364
    mikehha
    Participant

    Re: siemens wm16s794gb/09

    disconnected motor still no joy ? any other ideas! dont want to scrap it its to good

    January 9, 2014 at 8:24 am in reply to: siemens wm16s794gb/09 #407362
    mikehha
    Participant

    Re: siemens wm16s794gb/09

    Thats what I thought but the spin buttons are a plus and a minus have tried holding both and separately but still cant get rid of fault code.

    January 8, 2014 at 5:15 pm in reply to: siemens wm16s794gb/09 #407360
    mikehha
    Participant

    Re: siemens wm16s794gb/09

    f43 motor fault martin. (new motor fitted)

  • Author
    Posts
Viewing 15 posts - 151 through 165 (of 217 total)
1 2 3 … 10 11 12 13 14 15