Forum Replies Created
-
Posts
-
Re: zanussi zwd1471
No earth leakage on element, carbons at 70{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}
Re: Whirlpool w/machine awo/d5706
board…. check power going into board from mains filter if power there its a board
Re: fisher paykel quntum
yep one is flood switch probable a hose the other fault is the top tank isnt getting any water because of the first fault hope this helps
Re: info
thanks for the info have tried their web site but no phone number if anyone has it I would be most gratefull (pab ltd — appliance365.co.uk).
Re: WD440 Blowing dryer elements!
If you lift up the whole heater box not just the top and under where the fan is there is a plastic filter see if its blocked.
Re: zanussi zwd1471
thanks mike . have checked all pressure pipes and switches. my main concern is the fact that the m/c only runs for 2/3 min befor it flashes and goes back to the start of program .
Re: new appliances hot&cold fill
to all out there I fitted a hotpoint wd 740 last month with a HOT and cold water valves. They also supplied a single hose that split in two to go to both valves hope this helps .
Re: AEG HOB DEAD APART FROM AN E CODE
as aeg and zanussi are part of the same group I wonder if your e3 fault is the same as mine (posted thursday) so when you find the answer re post it thanks mike (mikehha)
Re: caremark
the front one for the tumble dryer I think it might be resetable but not sure as there isn`t much left. thanks Mike,
Re: Bosch SGS5302GB/07 Dishwasher
check the board chris as they are prone to dry joints around the heater relay
Re: siemans se25ao90/12 d/washer
no water in base and no blockages in pipe or m/tank display reads 188 cant get it to do a prog/reset
