[mowerman80]

Re: creda c361ew cooker

Ok date code etc 90100402 hope this helps.

[mowerman80]

Re: hotpoint bf12

Hi yes its defo the problem, its the timer clock not working .

[mowerman80]

Re: zanussi zwd 1627

ok went back today and sure enough one of the wires on the ntc had pulled off. Bad bit is after putting a new plug on the end and testing the ntc it still diddent work 😥

[mowerman80]

Re: zanussi zwd 1627

Great info will go back and try that. This is why this site is so good ,thanks.

[mowerman80]

Re: zanussi zwd 1627

Ok ive changed the dryer board and its still not getting any power to the dryer elements. Think im gona cut my losses on this before i go broke unless anyone has any suggestions?

[mowerman80]

Re: Stoves Oven Resistor

Hi from what i can remember it is 100 ohm i got mine from rs components.

[mowerman80]

Re: zanussi zwd 1627

hi pnc number is 914604030/02 ,it has the dryer pcb with 4 black boxes inside . i have checked the wire connectors on the board and they seem ok. connect distribution dont seem to do the part so is this part direct from zanussi?

[mowerman80]

Re: tecnik oven hinges

Thanks for that ,hard to read some of them burned on plate numbers.

[mowerman80]

Re: tecnik oven hinges

Rechecked numbers and they are correct. They do look like neff hinges.

[mowerman80]

Re: ise 10

Hi went to it today as i walked in the house she said she had just tried it again and was still faulty. I turned it on and turned the dial and all was perfect ,i think this machine is haunted as ive been to it three times for faults and as soon as i turn up ,nothing wrong. Costing me a fortune bloody thing. 😥

[mowerman80]

Re: ise 10

Thanks all for your replys i think removing the ball in the sump may be the way to go as when it was emptying it was pulsing a bit ,worth a try anyway.thanks

[mowerman80]

Re: ise 10

Hi thanks for your reply. Been back again today as she said it is doing the same ive checked everything took the drain hose off and the sump hose off stripped the pump and all is clear. She is using hardly any powder but she says it will be okay for a couple of washes then bring up f3 again. I filled and drained the machine 30 times today and it was perfect every time . I dont know what else i can do .paul

[mowerman80]

Re: prima lpr 450

Hi that is not the part that i need ,i thought it was so ordered it but it came back as the grey plastic feed pipe that fixes to the top basket. I need the clear feed pipe from the heater up the back of the machine and is fixed to the back of the machine with a large plastic nut. thanks.

[mowerman80]

Re: hotoint wf320 washer

Ok thanks will be on the phone to tony first thing.

[mowerman80]

Re: miele dishwasher

thank you for your advice clayside (:

[Author]

Posts