Forum Replies Created
-
Posts
-
Re: golocal reactive
I got called out in november to fix a dishwasher for go local,still not been paid . Numerous phone calls and emails all I get back in email from BEVERLY in accounts is I must be patient as they have hundreds of engineers to pay,yea like I believe that after all these comments . It makes me so angry that we the engineers do all the hard work for a nominal call out fee and they GO LOCAL get all the profits. 👿
Re: bosch dishwasher
Well it turns as freely as a new motor ,ive done lots of these before and tend to know the signs of a worn motor this is why it is puzzling me.
Re: bosch dishwasher
HI its nothing stuck in the chamber as when its supposed to start the pump i flicked the centre of the motor and its free to turn. i might be thinking along the lines of impellor jug ,if not it could be the motor windings breaking down,or module maybe ?only trouble is they are both expensive parts for trial and error .
Re: Miele T284 drier.
Hi ive got one of these dryers doing this and the carbon brushes are well worn,not touching the drum much. What do the carbon brushes do? and did you get the problem sorted?
Re: beko wm6167w
Ok been back and its a e11 fault code (no anti clockwise motor action) so its the motor relay on the control board. Can anyone tell me which part number it is for the board and what are the differences between the two part numbers? as there is a price diference . Thanks.
Re: zanussi zdf862w oven
Thanks for the info ,but even after that i will still have wires left over as there is i think 6 wires going to the original stat .
Re: beko nf740 fridge freezer
Well thanks for your replys ,i always seam to get the repair jobs that no one can help with .
Re: hotpoint dishwasher pcb repair
Hi yes i know about the bosch ones im always doing them, but the 100 bit hotpoint one you can never see any damage so it must be internal ,but which bit ?
Re: creda c361ew cooker
Thanks for all the info ,it has a seperate selector switch with the 2 pole stat clipped on the back. all the info i have seems to contradict its self. so if i use part number 6203969 do i need to remove the selector switch or does it go on the back as it is now? Also could it be part number 6222155 .It said in the tec bullitin to use part number et50000/j5 but you said part number 6203969 which is different. Why cant companys just use one stat for all ovens? would make life alot easier.
