msappliance

Forum Replies Created

Viewing 15 posts - 136 through 150 (of 208 total)
  • Author
    Posts
  • in reply to: SMEG WD16ba #223709
    msappliance
    Participant

    Re: SMEG WD16ba

    Hi there,
    Make sure that the water taps to the machine have not been turned off.
    Does this machine have a hot and cold fill pipes?.
    If so its quite possible that a water valve is faulty.
    Unplug the machine before investigating.

    in reply to: Fridge/freezer apm6824 #223475
    msappliance
    Participant

    Re: Fridge/freezer apm6824

    Not too sure on this model but this sounds like a fast freeze button.
    Do not keep this switched on all the time as it will damage your compressor as it by-passes the thermostat. This is used for food you want to freeze quickly and only leave it on for about one hour.

    in reply to: Hotpoint WF560P will only run spin cycle #223135
    msappliance
    Participant

    Re: Hotpoint WF560P will only run spin cycle

    possibly a module ormotor fault you best get an engineer to look at this one

    in reply to: Charlton Domestic Dishwasher CS1W fails to start #223021
    msappliance
    Participant

    Re: Charlton Domestic Dishwasher CS1W fails to start

    possilbly the water valve is faulty unplug before checking.

    in reply to: Ariston lsi 45/50uk #222950
    msappliance
    Participant

    Re: Ariston lsi 45/50uk

    machine is filling up ok takes about 35 mins to fault is also heating.
    when faults will wash forever

    in reply to: door seal on miele ws5427 #222897
    msappliance
    Participant

    Re: door seal on miele ws5427

    You need to open the front of the machine, unplug before investigating

    in reply to: Pat testing charges #221474
    msappliance
    Participant

    Re: Pat testing charges

    Nice one, Thanks

    in reply to: Hoover ca232.uk #220263
    msappliance
    Participant

    Re: Hoover ca232.uk

    Thanks mate will go back and check.

    in reply to: Hotpoint WMA interlock #220395
    msappliance
    Participant

    Re: Hotpoint WMA interlock

    same kind of lock is also used in bosch open them up and you can see the terminals.

    in reply to: fault codes pdf #212271
    msappliance
    Participant

    Re: fault codes pdf

    hi Jeremy can you please send me a copy aswell, thanks in advance, Mike

    in reply to: Samsung Refrigeration Training #184606
    msappliance
    Participant

    Re: Samsung Refrigeration Training

    Yeah count me in, thanks 😆

    in reply to: Tecknic d/w #215940
    msappliance
    Participant

    Re: Tecknic d/w

    nice one penguin ill give that a try

    in reply to: necht song d7 se5515 #216794
    msappliance
    Participant

    Re: necht song d7 se5515

    Cooling fan is working ok

    in reply to: Miele G560W Leaking #215425
    msappliance
    Participant

    Re: Miele G560W Leaking

    miele d/w are known for the water inlet inside the tank to come loose, make sure this is tight half a turn is enough, sorry for the late reply.

    in reply to: Tecknic d/w #215938
    msappliance
    Participant

    Re: Tecknic d/w

    pls help i hate d/w

Viewing 15 posts - 136 through 150 (of 208 total)