[OLLIE2806]

Re: Zanussi ZWD16270W Wierd Fault,

There wasn’t anything in it (no powder or softener) was just running a cleaner through it. (that went straight in the drum). Have since tried it with nothing in, using quick setting and normal setting and it went through fine. Baffling really! I’m going to put it on with a load in shortly.
How do I run a diagnostics test on one of these?
Thanks for your response.
Ollie.

[OLLIE2806]

Re: Bosch WTA3003GB/01 Overheating Issues

Thanks Guys. Much appreciated

[OLLIE2806]

Re: Bosch SRS46A02GB/08 Dishwasher – Random faults

Is that manufacturers number 166874? (not 166875 regen solenoid)

Thanks again for all your help

[OLLIE2806]

Re: Bosch SRS46A02GB/08 Dishwasher – Random faults

Is that manufacturers number 166874? (not 166875 regen solenoid)

Thanks again for all your help

[OLLIE2806]

Re: Bosch SRS46A02GB/08 Dishwasher – Random faults

Also there is some ticking and gringing noises coming from the heater. Dont now if its the lack of water or if its even relevant but thought i’d share

[OLLIE2806]

Re: Bosch SRS46A02GB/08 Dishwasher – Random faults

First off thanks for all your responses martin, Much appreciated.

The water level is definately a tad low,

I’ve now watched it fill up and it started filling as you would expect but i’ve always thought they filled the water chamber up, after a certain level it dumps that water in and the circ pump cuts in and then the rest of the water goes in but on this i’ve noticed the water is going straight into the tub and not fillin the water chamber really very much at all, then there’s a 5 or so second pause and the circ pump cuts in.
Any clues mate?

[OLLIE2806]

Re: Bosch SRS46A02GB/08 Dishwasher – Random faults

Sorry martin that wasnt the best description i’ve ever put together. lol.

Do you mean the microswitch that is visable on the heater by just taking the side panel off? If so its not putting continuity to the heater all the time so would assume its ok. Or do you mean the water sensor on the heater? If so how could i test that?
I’m thinking could it be on of the valves on the metering tank/salt pot or someting? Although all have continuity through them.
Its just wierd how it fills up fine first time everytime but doesnt to seem to fill up properly later in the programme.

[OLLIE2806]

Re: Bosch SRS46A02GB/08 Dishwasher – Random faults

Anyone?

[OLLIE2806]

Re: Bosch SRS46A02GB/08 Dishwasher – Random faults

Not being too daft Martin but what one is that and how would i know? do you mean just sticking?
Seems a bit wierd it always fills first time fine. I’m baffled.

[OLLIE2806]

Re: Bosch SRS46A02GB/08 Dishwasher – Random faults

I’ve now cleaned the float chamber etc, all is fine there but i have now noticed that its not filling for the rinse, the circ pumps running, getting warm in there but just with no water in it, yet it fills for first bit fine everytime but doesn’t fill up for the rinse. (its on the quick wash it shows 14 mins to go and no / very little water in but circ pump etc running fine)
Any ideas?
Thanks in advance

[OLLIE2806]

Yeah that is 859. Million ohms sorry.

[OLLIE2806]

Re: Hotpoint WT640G – Keeps Washing

Element meters out fine. 29Ohms & 859 on Ins. Any other ideas?

[OLLIE2806]

Re: Tricity Bendix – S151OW – SLM44100032 – auto prob

Hi Martin,
Thats definatley the number i can make out, altough it is a bit blurred on the label, Its about 12/13 years old.

[OLLIE2806]

Re: Neff W4380X1GB/01 FD-8109 – 1 Min

Hi Martin, There doesnt appear to be an X on the selector. Its not like the bosch turn dial.
I tried turning it off for 5 mins etc to no avail

[OLLIE2806]

Re: Indesit WIXE127 -091377340002 – Flashing Display

It was the main board.

[Author]

Posts