Forum Replies Created
-
Posts
-
Re: Westinghouse RJ422E Silhouette earth leakage on defrost
Can’t claim any great expertise in regard to refrigeration beyond the general principals. What you are describing would suggest the defrost element itself having developed an earth fault, so that would be the place to start – get it meggered for leakage. It’s usually on the back panel somewhere, occasionally behind the evaporator, which can be a bit awkward.
Power off when investigating.
Regards,
Penguin45.Re: Hotpoint first edition 800
A WM52 perhaps? Motor brushes will have worn out. You’ll need a pair of these:
http://www.ukwhitegoods.co.uk/modules.p … ducts_id=1
Power off before fitting or click the link below for pro help.
Regards,
Penguin45.Re: SMEG Double Oven – A42-5 – Blew the fuses
You’ll need one of these:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=332
So not particularly expensive – an engineer will charge for an hours work, so check that out when you make the appointment. Click the link below for a local engineer.
Power off if you wish to do this yourself.
Regards,
Penguin45.Re: hoover hp6 130m
wilf wrote:although its a newer one they still have not improved the hose arrangement to prevent rubbing pressure hose /vent hose
Ah, but what a lovely little earner……..
Chris.
Re: whirlpool ADP4501WH error
Had one do this last week – drain and circ pump pulsing at random. Reset stopped it, soon as you programmed it, off again.
Board………… 4812 218 38209, £61 list.
Chris.
Re: One to keep an eye on.
He say –
“philfish.
A few full stops and the occasional comma would make your post a little easier to read.
Robelee”
Just plain rude IMO.
Chris.Re: 30 ways to annoy people!
Far too complicated……..
1 – Be Goatboy
2 – Be Goatboy
3 – Be Goatboy………………
30 – Be Goatboy😀 😀
Chris.
Re: hoover hp6 130m
Yup, interlock function works from control board, so most likely candidate.
Chris.
Re: Hoover Quattro Whisper 1300 washing machine
It won’t spin with the water in. Drop drain hose into bucket or washing up bowl to drain. There is normally a filter under the kickboard at the bottom which can be removed allowing the foreign object to be extracted.
Without the model number it is difficult to be more exact.
Regards,
Penguin45.Re: Hotpoint CTD80 water container compartment
Presumably some kind of leak at the filling point for the drawer – could be a simple alignment problem. It’s worth popping the lid off and having a look. Power off if making any adjustment, or click the link below for pro help.
Regards,
Penguin45.
