Penguin45

Forum Replies Created

Viewing 15 posts - 15,811 through 15,825 (of 19,678 total)
1 2 3 … 1,054 1,055 1,056 … 1,310 1,311 1,312
  • Author
    Posts
  • February 18, 2006 at 6:54 pm in reply to: miele door seal #166087
    Penguin45
    Participant

    Re: miele door seal

    Doddle – whole front opens up like a cupboard door.

    Chris.

    February 17, 2006 at 7:55 pm in reply to: GRINDING SCREECHING HOOVER TV30 TUMBLE DRYER PLEASE HELP #166094
    Penguin45
    Participant

    Re: GRINDING SCREECHING HOOVER TV30 TUMBLE DRYER PLEASE HELP

    Rear bearing and shaft will have collapsed. Time for a new one…….

    Regards,
    Penguin45.

    February 17, 2006 at 7:23 pm in reply to: miele door seal #166085
    Penguin45
    Participant

    Re: miele door seal

    4223911 is listed for the W8 series. You can get it as 18-ML-10 from Maddocks, under £8.

    BTW, the “T.no” is the part number, and virtually every Miele component has it printed or embossed on somewhere.

    Chris.

    February 17, 2006 at 7:09 pm in reply to: bosch WFL 2260UK/04 condenser dryer #166064
    Penguin45
    Participant

    Re: bosch WFL 2260UK/04 condenser dryer

    Your model number is a washing machine………..

    Chris.

    February 17, 2006 at 12:33 am in reply to: Indesit WD12S #166033
    Penguin45
    Participant

    Re: Indesit WD12S

    Tricky – level switch failure/air leak to level switch/blockage in pressure chamber to air switch all possibilities. Had an Indesit today which filled regardless of programme selected – board failure.

    Time for pro help? Click the link below. Power off if investigating further.

    Regards,
    Penguin45.

    February 17, 2006 at 12:19 am in reply to: Whirlpool refrigerator ARZ726W Transition connector #166034
    Penguin45
    Participant

    Re: Whirlpool refrigerator ARZ726W Transition connector

    There is a response to your original post, check that please.

    Regards,
    Penguin45.

    February 17, 2006 at 12:14 am in reply to: DIPLOMAT DW MOTOR #164382
    Penguin45
    Participant

    Re: DIPLOMAT DW MOTOR

    kevinlewis wrote:
    What is IIRC?

    “If I recall correctly”

    The Big Askoll pump has a pcb down the middle of the field coils, some have a TOC as well. They are notoriously troublesome – save yourself a heap of trouble and put the conventional motor in.

    Chris.

    February 16, 2006 at 8:09 pm in reply to: Ariston LSI61 D/W Error Codes #166005
    Penguin45
    Participant

    Re: Ariston LSI61 D/W Error Codes

    Have a look in the “Error Codes” thread at the top of this forum.

    Chris.

    February 16, 2006 at 12:35 am in reply to: new element not working ? #165997
    Penguin45
    Participant

    Re: new element not working ?

    Big bang = big load back through system. Stat should click just after turning on – if it doesn’t, it’s goosed. Testing with multi meter (and the power off) will confirm. Very unlucky IMO.

    Regards,
    Penguin45.

    February 16, 2006 at 12:23 am in reply to: new element not working ? #165995
    Penguin45
    Participant

    Re: new element not working ?

    problem wrote:One other thing to note is the thermostat aint clicking when turned also, this is a brand new thermostat one month old so know this is ok.

    If it’s not clicking, it’s not OK – element fusing will have fused the contacts, so element and stat required.

    Regards,
    Penguin45.

    February 16, 2006 at 12:19 am in reply to: “Ooooh Matron” ? #164476
    Penguin45
    Participant

    Re: One to keep an eye on.

    OK, pm’d him – check your PM for copy.
    Chris.

    February 16, 2006 at 12:09 am in reply to: “Ooooh Matron” ? #164474
    Penguin45
    Participant

    Re: One to keep an eye on.

    Procedure goes – PM, say Hi, then do the “keep it safe, keep it sensible or I’ll edit/delete you”

    Want to do it, or shall I?

    Chris.

    February 16, 2006 at 12:07 am in reply to: My hotpoint wma9 doesn`t spin at all #164432
    Penguin45
    Participant

    Re: My hotpoint wma9 doesn`t spin at all

    I’m with Iadom here – belting the motor is a bad plan……. although satisfying. Faulty motors, computer boards, chaffed wiring, subsidiary components with wrong values and earth leakages – the list is endless on these.

    Engineer time – click the link below. If you are going to investigate further, power off.

    Regards,
    Penguin45.

    February 15, 2006 at 11:59 pm in reply to: Whirlpool AWM328 Washing Machine Problem #164468
    Penguin45
    Participant

    Re: Whirlpool AWM328 Washing Machine Problem

    Inner door panel, under kick board, rear of machine, back page of user book – starts with 8…….. 😀

    Regards,
    Penguin45.

    February 15, 2006 at 10:21 pm in reply to: Bosch dishwasher SPS5462GB/19 not heating #164452
    Penguin45
    Participant

    Re: Bosch dishwasher SPS5462GB/19 not heating

    I put in your first thread for you – static heat ’til temp – stat closes and re-starts timer 😀

    Check wiring at the hinge pivot point and the retainer on left hand side of door.

    Chris.

  • Author
    Posts
Viewing 15 posts - 15,811 through 15,825 (of 19,678 total)
1 2 3 … 1,054 1,055 1,056 … 1,310 1,311 1,312