Penguin45

Forum Replies Created

Viewing 15 posts - 16,411 through 16,425 (of 19,678 total)
  • Author
    Posts
  • in reply to: Indesit w93 washing machine problem #157356
    Penguin45
    Participant

    Re: Indesit w93 washing machine problem

    If you’ve got the count right, it’s an electronics problem. The small processor has been corrupted (eeprom) – possibly. None of these codes are actually definitive, so given that the computer board is an expensive component, I would seriously suggest getting some pro help.

    Regards,
    Penguin45.

    Thanks for the PM 😉

    in reply to: Funny pictures… (beware: cookie assault) #153918
    Penguin45
    Participant

    Re: Funny pictures… (beware: cookie assault)

    Er, Gegsy’s night out………..?

    Chris.


    spilling mistoke

    in reply to: Bosch SGS66E02GB/45 Dw #157298
    Penguin45
    Participant

    Re: Bosch SGS66E02GB/45 Dw

    Ok, Gegsy you heartless so and so….. From the “fish-in-the-ear”

    Fallo – failure
    Calentamiento – heating
    Llenado (you sure that’s not Welsh?) – filling
    Posicionamiento – positioning – timer?
    Tacometrica – no idea – motor?

    HTH
    Chris.

    in reply to: Smeg SE398X/1 stat #157344
    Penguin45
    Participant

    Re: Smeg SE398X/1 stat

    818730401 – £30.68 list.

    Chris.

    in reply to: indesit d63 #157337
    Penguin45
    Participant

    Re: indesit d63

    rigometzwkd wrote:I love you, I love you, I love you !!!!

    Hope Mrs P doesn’t spot this one………. 😀

    Glad to help,
    Penguin45.

    in reply to: Siemens dish washer Lady 45 #157333
    Penguin45
    Participant

    Re: Siemens dish washer Lady 45

    There were two standard faults on this range, Dragan. One was the wiring breaking in the door where it pivots. The other was the softener unit solidifying and not allowing the tank to drain into the machine quickly enough.

    If the tank is not refilling, have you checked the float/switch set-up in the fill matrix? This jams occasionally.

    If this is the same basic machine as the UK ones, there are 2 stop positions – one at the end of the pre-wash and one at the end of the main programme.

    HTH,
    Regards,
    Penguin45.

    in reply to: indesit d63 #157334
    Penguin45
    Participant

    Re: indesit d63

    Check the label on the edge of the door, Sara for the exact model designation of your dishwasher.

    Regards,
    Penguin45.

    in reply to: Proline EF6400SS – heats but won’t exceed 75degC?? #157302
    Penguin45
    Participant

    Re: Proline EF6400SS – heats but won’t exceed 75degC??

    Oven thermostat most likely culprit. P/no 481920, around £30 from memory. An email to spares@ukwhitegoods.co.uk for confirmed pricing and ordering.

    Regards,
    Penguin45.

    in reply to: Repairs@ #157286
    Penguin45
    Participant

    Re: Repairs@

    Click on this:
    http://www.ukwhitegoods.co.uk/modules.p … tit&lid=47

    and go from there………

    Chris.

    in reply to: Can you buy a new filter cover? #157282
    Penguin45
    Participant

    Re: Can you buy a new filter cover?

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=392
    is the pump complete @ £23.90 inclusive.

    Pump filter C00045027 – £15.21 inc VAT + Carriige – order part though.

    Regards,
    Penguin45.

    in reply to: CYCLE INCOMPLETE #157250
    Penguin45
    Participant

    Re: CYCLE INCOMPLETE

    Put the original timer back on and see what happens – it almost certainly won’t be faulty.

    Power off…….

    Regards,
    Penguin45.

    in reply to: Indesit IDL500(in the pink) #156780
    Penguin45
    Participant

    Re: Indesit IDL500(in the pink)

    gegsy wrote:

    millymog wrote:
    Shame softus isnt here to read that…….On second thoughts 😆

    Stop it….. We’ve had enough personal comments on this thread…….

    And he probably can read this, you don’t have to be a member to read the public forums.

    Penguin45.

    in reply to: whirlpool dryer AWZ241 #157300
    Penguin45
    Participant

    Re: whirlpool dryer AWZ241

    Not listed separately, Bob. Complete assembly is 4812 214 78615, £163.57 list 😯 .

    Chris.

    in reply to: Zanussi FLA 1201W motor price #157235
    Penguin45
    Participant

    Re: Zanussi FLA 1201W motor price

    bobokines wrote:your connect rep

    What rep? I’ve had no contact with them since the account was opened. Doesn’t matter really, it was the only on-line price I could summon up at that time of night……

    Chris.

    in reply to: BEKO WMA1715S #144316
    Penguin45
    Participant

    Re: BEKO WMA1715S

    The old 10 + 12 series used to go regularly, the newer ones seem to be a lot more reliable, IME.

    Chris.

Viewing 15 posts - 16,411 through 16,425 (of 19,678 total)