Penguin45

Forum Replies Created

Viewing 15 posts - 16,426 through 16,440 (of 19,678 total)
1 2 3 … 1,095 1,096 1,097 … 1,310 1,311 1,312
  • Author
    Posts
  • December 9, 2005 at 12:35 am in reply to: Slogan? #155304
    Penguin45
    Participant

    Re: Slogan?

    Play on the good bits:

    We know what you need.
    We specified it.
    We’re having it made.
    We’ve got all the bits on board if it goes wrong.
    Oh, it probably won’t.

    Write the slogan from there; those (hopefully) are the facts.

    Chris.

    December 9, 2005 at 12:21 am in reply to: indesit d63 #157215
    Penguin45
    Participant

    Re: indesit d63

    Static heat – got to be waiting for a signal from a thermostat……

    Chris.

    December 9, 2005 at 12:12 am in reply to: Holidays #132606
    Penguin45
    Participant

    Re: Holidays

    goosegreen wrote:Hit The Big 50 today

    Congrats BTW.

    Chris.

    December 8, 2005 at 9:17 pm in reply to: Holidays #132604
    Penguin45
    Participant

    Re: Holidays

    Who’s Dave?

    December 8, 2005 at 9:06 pm in reply to: Holidays #132601
    Penguin45
    Participant

    Re: Holidays

    goosegreen wrote:things are looking better.

    I’m not surprised if you’ve got Miss Christmas going with you 😀

    Chris.

    December 8, 2005 at 9:00 pm in reply to: Zanussi FLA 1201W motor price #157230
    Penguin45
    Participant

    Re: Zanussi FLA 1201W motor price

    P/no 1243910-03/9 SSP £121.56 on TDS

    £140.35 trade from Connect. :rotl:

    I despair of them, I really do.

    Chris.

    December 8, 2005 at 8:46 pm in reply to: AEG washer drier prob. #156306
    Penguin45
    Participant

    Re: AEG washer drier prob.

    Mail……..

    Chris.

    December 8, 2005 at 8:33 pm in reply to: Zanussi TC470 Condenser Dryer #157206
    Penguin45
    Participant

    Re: Zanussi TC470 Condenser Dryer

    The pulley must be under tension against the belt. Rotate motor against spring and re-route belt to other side of pulley.

    Power off.

    Regards,
    Penguin45.

    December 8, 2005 at 8:27 pm in reply to: Bosch SMS3042 #156328
    Penguin45
    Participant

    Re: Bosch SMS3042

    Providing you haven’t tried to refit the lead, you should be able to work it out as the relevant terminal will have two scratch marks on it. A powerful torch will help. Dismounting the timer may also help you see more easily.

    Power off of course.

    Regards,
    Penguin45.

    December 8, 2005 at 8:21 pm in reply to: Zan FL1084 timer makes unusual clicking noise > not advan #157171
    Penguin45
    Participant

    Re: Zan FL1084 timer makes unusual clicking noise > not a

    Stop solenoid as part of heater circuit.

    Chris.

    December 8, 2005 at 12:54 am in reply to: Ebay #157155
    Penguin45
    Participant

    Re: Ebay

    “Tell you what, you get the bits and phone me when they come. That’ll be today’s call out and an hours labour when I fit them for you. Or shall I just go and get them from the van now?”

    Not really had a problem with it.

    Chris.

    December 8, 2005 at 12:43 am in reply to: Faulty Bosch SGS5318GB/12 #157153
    Penguin45
    Participant

    Re: Faulty Bosch SGS5318GB/12

    Dry joint on power board. Extensive posts if you use the search facility.
    Power off if investigating further.

    Regards,
    Penguin45.

    December 7, 2005 at 8:12 pm in reply to: The Doors – Can you get out?? #157045
    Penguin45
    Participant

    Re: The Doors – Can you get out??

    Couldn’t mind Jim Morrison anywhere……..

    Chris.

    December 7, 2005 at 8:04 pm in reply to: beko skips heat cycle #157079
    Penguin45
    Participant

    Re: beko skips heat cycle

    I keep getting broken terminals at the heater with these.

    Chris.

    December 7, 2005 at 7:37 pm in reply to: BEKO WMA1715S #144312
    Penguin45
    Participant

    Re: BEKO WMA1715S

    mike412 wrote:Customer did not want to spend much money on this machine, so the job
    was not progressed. I must admit I was not disappointed.
    Mike.

    Curious – board’s only about £45, so not that dear. The current Bekos are quite decent quality machines.

    Chris.

  • Author
    Posts
Viewing 15 posts - 16,426 through 16,440 (of 19,678 total)
1 2 3 … 1,095 1,096 1,097 … 1,310 1,311 1,312