Forum Replies Created
-
Posts
-
Re: Garment steamer – Thermostat?
There’s a link HERE, but that’s all I can find. Might be best to contact them and see what their service arrangements are.
Penguin45.
Re: Zanussi ZT695 not filling
IWMS for you appliance is HERE.
It’s a screwdriver and patience job really – once you get the lid and side panel off, it’s pretty obvious. Care needs to be taken when unscrewing the vent into the side of the tub.
Power off first, of course.
Penguin45.
Re: Zanussi ZT695 not filling
THIS ARTICLE will explain what is most likeley happening. Yours is the IWMS machine.
Penguin45.
Re: DW009 Dishwasher E2 error
If it’s coupled to a spigot under the sink, that may be blocked.
These Chinese machines do tend to get blocked drain pumps quite easily as the filters don’t fit very well. Pump blockage will involve dragging the machine out and removing the base cover (and plug) for access.
Penguin45.
Re: Door hinge for AEG oven
Hinge for either side is p/no 3301540-01/3. spares@ukwhitegoods.co.uk will be able to get them for you promptly.
Penguin45.
Re: Hoover HDC7FME error on display E then b (Eb)
C = configured as condenser dryer.
Eb = programme selector short circuit – dryer reverts to cooling cycle.I suppose you need to replace the selector.
Penguin45.
Re: Rosieres 4040DB oven element
Thermostat is jammed in the “On” position. Red light should cycle with the thermostat to tell you when power is on and off to the elements.
Thermostat for both ovens is the same; p/no 93682722.
R/h base element is p/no 93700953 and apperars to have three fingers.Penguin45.
