Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: DW009 Dishwasher E2 error
No drain detected in the time allowed.
Penguin45.
Penguin45
ParticipantRe: Siemens SF25A061CB/15 slimline not draining
Remove plug, door outer panel, kick plate and lower cover plate. Drain pump is a twist-fit on the left underneath. It’s really, really awkward…..
Penguin45.
Penguin45
ParticipantPenguin45
ParticipantRe: hotpoint wt400
No – fault codes on this appliance are indicated by the power lamp flashing in a pattern; ie 1-2-3-4-pause-repeat. The selector will also be clunking round.
In this instance, I would suspect that the pcb is damaged, due to whatever component short circuited – the OP will have to identify that component first. Lid lock, motor and heater are primary suspects.
Penguin45.
Penguin45
ParticipantRe: Diplomat ADP 8132
I take it that you’ve received one of THESE?
This device is supposed to screw to the back lower panel, next to where the cable comes in. Live goes through one pair of terminals, neutral through the other.
Unfortunately, there is no official information to be had.
Penguin45.
Penguin45
ParticipantRe: FAGOR FUS3611IT Outer Door Trim Broken
Sort the details out by PM.
Penguin45.
Penguin45
ParticipantRe: Beko D3422 Dishwasher…. to buy or not to buy
Beko started at a pretty low base when they first appeared in the UK – they have got a lot better and are starting to creep into the mid-range on the quality stakes.
Just remember, you absolutely will get what you are prepared to pay for.
Penguin45.
Penguin45
ParticipantRe: HPT WMA46.DOORLOCK
Garn, you sinner……. You have not been to chapel for three weeks…….. your immortal soul is in peril……..
:p45:
Penguin45
ParticipantRe: builtin whirlpool oven
Model number………..
Penguin45.
Penguin45
ParticipantRe: GDA BF 72 (Smeg 5 Button with Display D/W)
Hmm – it does have a diverter valve. Sent you some stuff.
Chris.
Penguin45
ParticipantRe: AEG Competence B1180-4 cooling fan problem
If the cooling fan won’t cut in, you’ll need THIS.
Power off if you intend to do this yourself.
Penguin45.
October 9, 2009 at 6:26 pm in reply to: Hoover Maxi 6 TC50 Tumble dryer on/off switch problem #299079Penguin45
ParticipantRe: Baumatic BWD12
It’s just a straight-through Merloni/Servis pump…….. Even Shop@ is virtually giving then away.
Chris.
Penguin45
ParticipantRe: GDA BF 72 (Smeg 5 Button with Display D/W)
Tried the re-set procedure?
Chris.
Penguin45
ParticipantRe: INDESIT WD12X
They hit “print” and think they know it all.
:p45:
-
AuthorPosts
