Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: vt9 long capillary for er3817c
2054704552 is the gen article – £21 from my wholesaler of choice.
Chris.
Penguin45
ParticipantRe: Newpol washing machine
Got any numbers from the belt? 1230J5MAEL is a typical description.
Penguin45.
Penguin45
ParticipantRe: Bosch Exxcel SGS5362GB – main wash motor fault??
P/no 174730 – impellor and seal kit. spares@ukwhitegoods.co.uk will be able to get ome for you promptly.
Penguin45.
Penguin45
ParticipantRe: what’s this part called?
Alternator valve – switches water between the top and bottom rotors.
I’ve had a couple fail, not seen one leak, though it has to be possible.
Penguin45.
Penguin45
ParticipantRe: Bosch tripping out mains
P/no 179798 is what you require. spares@ukwhitegoods.co.uk will be able to get you one promptly.
Penguin45.
Penguin45
ParticipantRe: Hotpoint dryer heater, 3rd stat ??
Thermistor should read in kOhms.
Chris.
Penguin45
ParticipantRe: Diplomat ADP8902 – Water leak
The water level control is not working and the overflow pipes are running water into the base tray. The machine is made by SMEG and this is a particularly awkward one to solve. Blockage, pressure switch, computer are all possible and likely suspects.
You really should get help to solve this one.
Penguin45.
Penguin45
ParticipantRe: Belling XOU500ss selector switch
I get 082618438 – main oven doesn’t appear to have a selector switch.
Sorry, no price.
Chris.
Penguin45
ParticipantRe: tricity aw1100w washer – no spin
Timer fault. EMW can supply at sensible cost. Check motor very carefully.
Chris.
October 7, 2009 at 9:18 pm in reply to: WhiteKnight tumble dryer drum bearing assembly required. #298947Penguin45
ParticipantRe: WhiteKnight tumble dryer drum bearing assembly required.
421309205531 – £73 from M/part 😥 .
Chris.
Penguin45
ParticipantRe: Hotpoint ultima washing machine
Model number is printed on the control panel and on a label on the door/hinge area.
It is the one essential piece of information required.
Penguin45.
Penguin45
ParticipantRe: Smeg 612 ss leaking underneath
Softener unit, yes it should full of brown sludge. Fill matrix is on the side othe machine – remove r/h side panel to view.
Penguin45.
Penguin45
ParticipantRe: ADG 7550 Tripping out
Possible – you need to get in there with a decent test meter and check.
Penguin45.
October 7, 2009 at 7:27 pm in reply to: WhiteKnight tumble dryer drum bearing assembly required. #298945Penguin45
ParticipantRe: WhiteKnight tumble dryer drum bearing assembly required.
Drum complete……
Chris.
Penguin45
ParticipantRe: adg 450 85111511591 D/W sticking
Rinse doesn’t turn the heater on, does it? Starting point – otherwise, pcb.
Chris.
-
AuthorPosts
