Forum Replies Created
-
Posts
-
Re: Indesit W123 tripped MCB, burnt board, overfilling
Burning of the fine tracks at the bottom of the pcb is your problem – the connections from the pressure switch run through that area of the board.
Repair is now an issue for independent repairers and home repairers alike. To solve this problem, you now need a new pcb, and port adaptor, a card reader and a suitable programme card. It just isn’t worth it…….
Penguin45.
Re: Diplomat APL 3201 IX Overheating and melting ready meal
Sounds like a thermostat issue to me. You need one of THESE.
Basically a screwdriver and patience job – power off first though, please.
Penguin45,
Re: soap powder not taken up
If the detergent is un-touched, you may have a valve failure. If it a soggy mess that hasn’t washed in, it’s down to water pressure. Might be worth checking the mesh filter into the valve. System work can dislodge all sorts of muck and goo.
Set the machine to a wash programme and open the drawer just enough to see if water is flowing into the compartment. You’ll need tp drop a towel down, as some water will dribble down the front.
Penguin45.
Re: Smeg Dishwasher constantly filling with water!
Aqua-stop fill hose for this machine is p/no 758972367. An email to spares@ukwhitegoods.co.uk will get things moving for you.
JD, please contact admin@ukwhitegoods.co.uk and ask for trade access.
Regards,
Penguin45,
Moderator.Re: Siemens Extraklasse XL1200
Spring is p/no 173228. As you are in Spain, your easiest purchase route is probably through http://www.bshappliancecare.com .
Lid and power off to fit – extra pair of hands might be useful – that drum unit is heavy.
Penguin45.
