Forum Replies Created
-
Posts
-
Re: Nardi b/in d/washer, control pcb, pt No. if poss please
If it is a Merloni product, the part number is probably on the part itself.
Penguin45.
Re: Siemens S9W1S dishwasher wont stop filling
Not enough information to work with and the model number is not valid.
Please try again.
Penguin45.
Re: My SMEG DWi710E1 will not complete wash cycles
If you are getting no error codes being flashed up, the pcb has almost certainly failed. There are corruption issues with these machines involving the mains suppressor and the soap box release solenoid, which would be worth investigating.
Power off first,
Penguin45.
Re: Whirlpool 7550 wont wash
Water level issue. Check that the black grid in the sump is not full of fatty deposits, thus jamming its operation. It’s a twist fit from undeneath if serious cleaning is required.
Power off first.
Penguin45.
Re: Smeg DWF614SS Problem
1/ Sticky buttons (unlikely)
2/ Corruption issue – mains suppressor or soap box release solenoid breaking down will affect the computer (good bet)
3/ PCB failed (entirely possible)Penguin45.
Re: Whirlpool Aquasteam 9769
If the screws are out, you may need to lift to disengage the support hooks.
Why, BTW?
Penguin45.
Re: Hotpoint WMA40 module part number.
When you buy a new board, it comes with a configuration sheet, which tells you how to programme it. Sounds like you need that sheet.
Have sent you some stuff.
Chris.
