[pmb]

Re: Cbn2222 brushes size changed

I have never had to tell customers they cannot wash towels
For a few weeks or use lower spin speeds and never had call backs
I just tell them it will sound different for a couple of washes.
Are they the economy brushes at £1.25 car93 or the better ones at £3.70 car137?

[pmb]

Re: Stuff you haven’t seen in years

I often use brushes that I have to cut with the Stanley knife so the slope is right, and often take out brass brush assembly and fit into existing plastic casing if I have not got the right one but only works if side locking bits are the same

[pmb]

Re: Bosch dishwasher heat pump saga

Thanks a lot guys I will look into that, I appreciate the help

[pmb]

Re: Whirlpool td dead

Thanks a lot Dave that’s a big help :tup:

[pmb]

Re: Bosch W/M door not locking

Aaeerh it was the chield lock.
Cannot believe I forgot about that, I don think any symbol was in
Display.
Thanks everyone

[pmb]

Re: Bosch W/M door not locking

Energised with screwdriver even with new interlock.
No clicking and not locking.

[pmb]

Re: Hoover dyn9164 e01 fault

This does not make sense, if you use screwdriver to energis
Interlock and it does not work, why would fitting a door work.

[pmb]

Re: Neff W/M lights flash

Thanks it did the trick, l have done this lots of times on Bosch
But never had it on Neff.

[pmb]

Re: Neff W/M lights flash

Thanks for reply Dave but How do you do a reset on a neff, I have turned to off position on knob to reset programme.

[pmb]

Re: Beko lense behind pcb

Sorry basic mistake, I think I was a bit too chilled out after a long day.
wmi 71641

[pmb]

Re: Hotpoint dw pcb

Thanks a lot Iadom, I will give them a try

[pmb]

Re: New van diesel or petrol

I don’t do white, choices in petrol is limited, also wanted air con

[pmb]

Re: New van diesel or petrol

That’s too big and to expensive, and I do not go into congestion
Any more, The Nissan nv200 was the perfect size or slightly smaller
Like the ford connect, At least one side door. 1 or 2 years old
I am not VAT registered and most vans are through a Dealer s
Which is an extra 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d},
Maybe I will get another nv200

[pmb]

Re: Bosch wm can’t reset

Hi i managed to reset this machine by holding start whilst in the off position moving either one or two positions anticlockwise and releasing. I was literally trying everything i could think of so i wasn’t sure whether it was one or two clicks

[pmb]

Re: Ise w256w noisey bearings

Anyone nearer then Luton, it’s a customer but I said I would give her some idea of cost and if it’s worth repairing.

[Author]

Posts