[pmb]

Re: Servis Module

Serial No 20034122801
I hack sawed only two connectors off end and put tags on.
No mistakes

[pmb]

Re: Hoover VHV380

Well, What was it,
Have got one the same

[pmb]

Re: AEG WM,not starting

I had told her to try it the next day and she just rang to say its OK.
It was the gremlins again.

[pmb]

Re: hotpoint suspension WD71

Thats good,
I wasnt sure if the kits fitted the newer models

[pmb]

Re: Skiing Holidays

Yes i go every year,not a cheap holiday, The later you leave it to book, The better the discount, Booked the week before last year “val”D” sere £580 with mark warner,A good company to go with
Prices have come down, but lift pass and hire of ski s can be expensive
Lidal has some good clothes at good prices, go for a breatherble jacket but not in yet, try and have a lesson at the dry slope before you go, you get more from the holiday if you learn the basics before you go.
most chalets are half board with free wine,
check out http://www.igluski.com and “welove2ski

[pmb]

Re: CDA CI993 door staying locked when half load is on

Went back and it has now changed, half load button doesnt affect it
But now you have to press off button and wait 2 minutes for door to open.
Its in a rented flat and they insist it has to be perfect.

[pmb]

Re: CDA CI993 door staying locked when half load is on

Yes it does otherwise i would bypass it 🙂

[pmb]

Re: FJS1425w

Hi Kez it is worth taking the wiring connector off which connects the display module to the main one, squeeze the connector plugs to make the pins fit tighter on the board and then put it back on. That normally does it otherwise its the main module 🙂

[pmb]

Re: CDA CI993 door staying locked when half load is on

Hi i still haven’t solved this so i will have one more try, any ideas? any help would be really appreciated
Thanks Peter

[pmb]

Re: AEG Lock clicks not starting

Replaced interlock and operated manually,
No i didnt check for blown tracks, should have, but if its the PCB,
I will not do the job (out of stock anyway) and tell customer to ring AEG

[pmb]

Re: AEG Lock clicks not starting

I checked the brushes, one of them anyway, hardly any wear
PCB are £133+vat So i dont wont to order one unless i am 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure.

[pmb]

Re: Bosch wm F01

Thanks Paul that helps alot although the door is locking i think i will try a new lock before writing it off 🙂 thanks again

[pmb]

Re: call out charge

You earn more on big jobs
You could charge R R P.on parts Which Are normally well discounted,
A bearing job on a Hotpoint RRP is spider £38. Bearing £26. tub seal £10 = £74+vat for parts
I would charge £97 total. which is less then RRP + my labour charge but i dont loose the job.

[pmb]

Re: call out charge

Local £39.50 any amount of time or calls, + parts Or £20 if its not worth repairing( its not a call out charge but for Diagnosing fault)
Intergratted is £45 or £30.
Areas closer to London £45 or £25. Intergratted £52.50 or £30.
I think its good to reduce labour charge if its not worth repairing,
They dont like to think they will pay alot if machine is scrapped.
Most people dont know what intergratted means,
So we allways ask on the phone” has it got a kitchen cabinet door fitted to washing machine”

[pmb]

Re: AEG 16800 wm 3 minute

Thanks alot Mike i appreciate your help i will go back and check that 😀

[Author]

Posts