[pmb]

Re: Fisher/paykel element

Dave who !
Tryed masterpart with this number but they said they cannot get it

[pmb]

Re: Smeg parts

Thats great, got the part from masterpart and it was in stock,
I was using old part number.

[pmb]

Re: Smeg parts

UKST121S
Its a special order with masterpart

[pmb]

Re: Miele spin

Thanks,
Its a job i didnt wont,
the price of the board is a silly price,
So i have told them to get a new machine
We charge a set labour charge and some jobs can be to much hassle

[pmb]

Re: Bosch dishwasher

I think your right,

[pmb]

Re: Bosch T/Dryer, Door micro switch

NO Its the one wiith the square door and the plastic cover behind door comes off, about 10years old
the mico switch is below bezal and above access via front plastic cover,
not sure if drum has to come out

[pmb]

Re: Whirlpool not spinning

Thanks alot Baron i will give that a check if the customer calls back, just spoke to him and it is working for now don’t you just love intermittant faults? 🙂

[pmb]

Re: E70 on john lewis/ zan td

Thanks alot i will email for that manual that will be very handy 😀 . I am going back today where is the sensor you mentioned? it is in a tiny cupboard this could be fun :innocent: thanks Peter :salute:

[pmb]

Re: Zanussi start button

Thanks for all the advice i will go back with the megger and give it a good check over

Went back to machine and mysteriously now working fine thanks alot everyone for the advice we will see what happens 😀

[pmb]

Re: Zanussi start button

check the button by taking board off, it was ok

[pmb]

Re: Zanussi start button

Changed door lock, still the same.
I most have causd it, but how ?

[pmb]

Re: Bosch Slim Dishwasher

It dosnt look easy to get out, so if we get it out we will just change it
Next time we will try that first time, thanks

[pmb]

Re: Bosch Slim Dishwasher

Thanks for info, It didnt work.
valve buzzing but not letting water in, so i will have to get new valve

[pmb]

Re: HPT Grease felt bearing?

An extra thick washer worked a treat,

[pmb]

Re: HPT Grease felt bearing?

Thanks
I have changed them before, without grease but thougt am i doing the right thing.
we are having trouble with rubbing drum at the back on one of those machines
I think the cabinet needs struts Its hard to get cabinet square their so flemsy,
I might try a large washer on bearing shaft between drum and bearing
if the lock pin will go in, It might get the drum a little bit further away from the backplate where its rubbing,

[Author]

Posts