Ray9500

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 72 total)
1 2 3 4 5
  • Author
    Posts
  • May 19, 2007 at 12:39 pm in reply to: Hotpoint TDC60P #214014
    Ray9500
    Participant

    Re: Hotpoint TDC60P

    Thanks for the reply, i’ve checked that as well!
    Going to have to go with a faulty module as a last resort 🙁

    Ray

    May 8, 2007 at 8:31 am in reply to: Bosch WVTi3240GB/01 E14 fault code #213023
    Ray9500
    Participant

    Re: Bosch WVTi3240GB/01 E14 fault code

    Ah, sussed it! NTC sensor on dryer unit 😀

    …i hope anyway!

    Thanks
    Ray

    April 20, 2007 at 8:16 am in reply to: Miele T560C tumble dryer-Heater access #211221
    Ray9500
    Participant

    Re: Miele T560C tumble dryer-Heater access

    Thanks for the reply, i thought that but i couldn’t get the panel to budge!

    Regards
    ray

    October 2, 2006 at 12:38 pm in reply to: Indesits spinning during wash #190449
    Ray9500
    Participant

    Re: Indesits spinning during wash

    Cripes!

    at least refitting the belt is easier than changing the module 😀

    Thanks
    Ray

    September 27, 2006 at 5:27 pm in reply to: Hotpoint FDW60 Dishwasher #188424
    Ray9500
    Participant

    Re: Hotpoint FDW60 Dishwasher

    Well stagger me, changing the motor cured it!

    It would be interesting to see how that was routed on a wiring diagram 8)

    Thanks again guys 😀

    Ray

    September 15, 2006 at 10:22 pm in reply to: Hotpoint FDW60 Dishwasher #188423
    Ray9500
    Participant

    Re: Hotpoint FDW60 Dishwasher

    Thanks for the replies!

    The insulation is fine, and the motor doesn’t run when it’s filled so this would seem to be the answer. I may have checked continuity on the motor in correctly 😳

    I’ll update after fitting a new motor, thanks again 😀

    ray

    December 7, 2005 at 9:23 am in reply to: Wiring diagram for Beko SCC2631 electric cooker #156435
    Ray9500
    Participant

    Re: Wiring diagram for Beko SCC2631 electric cooker

    That bits ok, I have a live supply to both sides of the inner grill element.
    I’m going to try a new selector switch.
    Thanks for the reply 😀

    Ray

    December 2, 2005 at 8:40 am in reply to: Wiring diagram for Beko SCC2631 electric cooker #156433
    Ray9500
    Participant

    Re: Wiring diagram for Beko SCC2631 electric cooker

    Thanks Dave
    I haven’t got an account but i’ll speak nicely to them 😉

    Ray

    December 2, 2005 at 8:38 am in reply to: Moody Miele T560C #156431
    Ray9500
    Participant

    Re: Moody Miele T560C

    Thanks Eddie 😀

    September 13, 2005 at 6:26 am in reply to: White Westinghouse spares #147193
    Ray9500
    Participant

    Re: White Westinghouse spares

    Thanks Craig 8)

    August 10, 2005 at 9:01 am in reply to: Whirlpool askoll wash motor #144424
    Ray9500
    Participant

    Re: Whirlpool askoll wash motor

    Thats what i had 😕 but Electrue’s site shows the earlier motor with this number.
    I’ll give them a call to confirm.
    Thanks Martin.

    August 4, 2005 at 4:55 pm in reply to: Hoover AE130 display fault #143967
    Ray9500
    Participant

    Re: Hoover AE130 display fault

    Well stagger me if it didn’t right itself overnight without any further help from me 😯
    Good job i didn’t order anything for it!

    Ray

    August 3, 2005 at 6:18 pm in reply to: Hoover AE130 display fault #143966
    Ray9500
    Participant

    Re: Hoover AE130 display fault

    I shall pop one in and see what happens 😀
    I will update when done.

    Thanks Dave

    Ray

    August 3, 2005 at 8:04 am in reply to: Hotpoint WD865 ‘Test’ fault #143848
    Ray9500
    Participant

    Re: Hotpoint WD865 ‘Test’ fault

    Many thanks for that, will give it a go today 😀

    Ray

    June 14, 2005 at 7:39 am in reply to: Diplomat ADP8221 timer lock out #138223
    Ray9500
    Participant

    Re: Diplomat ADP8221 timer lock out

    Thanks Dave, i’ll let you know how it pans out 😀

    Ray

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 72 total)
1 2 3 4 5