Forum Replies Created
-
Posts
-
Re: Bosch SMS9022/14 getting stuck at start of cycle
paulockenden wrote:Hi Gegsy, thanks for that (and sorry for the delay in replying).
Tried that – the hose was actually not too bad (a few horrible smelly bits, but nothing that would have blocked the tube).
One thing I have just noticed – the machine is taking a very long time to fill – the water entering the top of the matrix is just a trickle.
I wonder if that’s part of the problem, and whether it’s the inlet valve that’s decided it’s had enough? I guess the downside is that being an AquaStop machine, replacing the value will probably be expensive.
Hmmm…
Thanks again,
P.
Do you have the dishwasher plumbed in on the COLD water main or on the HOT ? – If it’s on the HOT then you need to get it changed to COLD – This will also cause what you are seeing.
Re: Replacing an Indesit WIDL 126S washer/dryer door switch
Sounds like you need a new “Door Interlock” this is situated behind the front panel. BEFORE YOU DO ANYTHING POWER OFF & UNPLUG !!! – You’ll have to undo the retaining band for the door seal & this will give you access to the Interlock by reaching round past the seal now unscrew & replace with new interlock. Refit seal & retaining band. If possible conduct a mega-test (L>E then N>E & Earth Continuity from Earth pin on plug to chassis (If you have any test equip) If readings good then plug back in & Test – Everything should work now.
Hope this is OK – Stay Safe !
Re: Tumble Dryer – do I go for vented or condenser?
Frelon wrote:Hi Don, et al
Any ideas on the Bosch Condensation Drain Hose Kit WTZ 1110? Is it a good idea to save on having to empty the condensate?
Frelon
To me thats seems a bit lazy & can/does lead to not cleaning filters (x2 BTW !) – But it’s up to you it’s your drier & a very good choice too !
Re: Tumble Dryer – do I go for vented or condenser?
Penguin45 wrote:Some were White Knight, some of them are now Gorenje, some are even Bosch.
Penguin45.
…AND dum dum durhhhhhhhhhhh…. WHIRLPOOL !!!
Re: Access Database for cust’s HELP !!!
Thanks to all that replied – I’ve downloaded openoffice – seems to be alot easier than MS’s version. Got it sussed now thanks again all.
Re: Diplomat ADP 8332 Dishwasher
Sound like you need a wash pump (Not too expensive for these.Thankfully)
Re: Bosch SGS5312GB/12 Detergent Drawer
Call anlocal engineer as it sounds as though you need a new dispenser lid or complete dispenser.
Re: Which Bosch Dishwasher would you recommend?
Buy any of the completely stainless tub SGS range – Open the door & ensure the tub base is stainless steel & not grey plastic. The stainless ones are the best – Trust me I used to work for them.
Oh & BTW make sure you clean your plates off before placing them in the DW as the filters aren’t great & debris will block the drain pump – Just trying to save you £££’s on Call-outs from BSH.Re: Diplomat ADP 8902 overflowing, but no leak can be found
Ask a local appliance engineer (NOT a Plumber !) to come take a look as it sounds like you need the sidetank cleaning/replaced – Dishwasher cleaner won’t clear that.
Re: Catchy ad.
Most people/customers I’ve spoken too in the past won’t touch Indesit or Hotpoint now with a barge pole ! – Happy days are here again…
Re: LG Dispenser leaking probs…
Penguin45 wrote:I thought you were supposed to seal the frontmost row of holes before fitting the new top?
Chris.
Damn ! Didn’t think of doing that !I thought it would be rectified by LG by now – Silly me :rolls:
Thanks for the tip 😉
Re: samsung washing machine Q1636SGS/XEU
Don’t know much about these but sounds like you’ve just solved it by mentioning that the Door Interlock doesn’t energise – Do you have voltage to door lock ? If you do it sounds like the door lock is burgered !
Re: sat nav
I couldn’t do without my SatNav – I’d get lost in a circle if I didn’t have it…
…You think I’m joking !
