Forum Replies Created
-
Posts
-
Re: Neff S4453N2GB01 Semi integrated dishwasher clicking
Simon46 wrote:489607 module received. Mod sheet saying wire might have to be changed from pin5 to pin7 of module. Appliances up to Kl12. Also after mod special circ pump control (sicasym) up to Ki12 must be switched off.
Module config by pressing S4/S5 and switched on with HS and toggled with S4 so 1 with Sicasym or 0 without.What is this for?
As far as I’m aware the Sicasym makes the drain pump start & stop/pulse to eliminate air blocks in the side tank – I’ve NEVER set any module to this system & neither have i had any recalls because of it so if you want my opinion – Don’t even bother with the Sicasym wiring change. Hope this helps.
Re: Bosch washing machine problem with powder staining.
Surely she’s gotta be over doseing or overloading or even a combination of the 2 – In which case a replacement machine isn’t gonna solve the problem !? – Just my 2 cents
Re: Fisher Paydell D/W D6031
Is it on a fused spur ? check the connections of the spur & also the on/off switches on them are not too clever – TBH I have only had 2 dealings with these & I hate them !
Re: Bosch SGS43C12GB/08 dishwasher overfills.
Check out the prev post about these..
Re: Static shock
Martin wrote:Time to get your Earth Loop Tester into action. 😉
Took the words right outta my mouth !
Re: Glaring design faults
How about Bosch not admitting they have a problem with their Fan Motors or Elements or Hinges on their ovens or the Fan Blade/Drums on their TD’s or the Elements (Instantaneous Water Heaters) blowing after a couple of months due to them advising the customers use those damned waxy DW cleaners !!! – 3 times I’ve been to one !!!
There’s gotta be a Golden Turd for these
Re: Whats the most annoying thing customers do?
richardable wrote:now i’m in the mood.
when you arrive at the house and customer says, my husbands had a go at it, or my brother, son, mate, partner knows a bit about these thing and he’s started to fix it……Or just fix it & make their other half look like a halfwit 😉 😆
Re: HELP ! Having problems sourcing parts
Cheers Richardable but I’ve just ordered the spares from here…
…thanks anyhoo & I’ll keep that number for future referance. TY
Re: Indesit Domed Torx Pulley Bolts
Wish I knew ! I’ve snapped loads of the Torx bits trying & still can’t get them out. Do Indesit have a hardened Torx bit that we could buy ?
kwatt wrote:Hi Redflame,
Drop a mail to Dave on spares@ukwhitegoods.co.uk, he can source them for you.
K.
Cheers Kwatt – I owe you, as the cust was thinking about buying a new oven & I want the damn money she already owes me ! Customers Pft !
Re: Bosch SGS43A32GB/01 (D/W)
If it’s a pre 2004 model make sure the cut-outs on the “Mushroom” antiflood mechanism is approx 2mm – If they are larger (5mm) then you will need to also replace this as well as the module (which now does a timed fill so does not rely on the floats) – I can’t remember the part numbers unfortunately. Also as “Clivejameson” said check the float & clean as they have a habit of attracting Iron filings from the water !
Hope this helps.Re: SMEG S350X/1 Serial:07310476
Also having major problems trying to source the damn parts – I can get the grill but not the lower element or the regulator ! Anyone have any ideas ?
Re: Free Training from Proctor & Gamble
Martin wrote:
Redflame wrote:
Did not mean to be sarcastic or nasty in any way mate as you can see from my quote, I meant no offence just curious how long he’d been an engineer !No worries my friend, your curiosity wasn’t all too apparent from your original post after all. Besides however long each of us have been in this business we are constantly learning from it, I’m sure you will agree?
Totally agree Maritn – You are never too old to learn & I’m all for adding to the learning experiance
