robwash

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 106 total)
1 2 3 4 5 6 7 8
  • Author
    Posts
  • December 19, 2007 at 3:16 pm in reply to: Bosch WTE86304GB/05 drier filter light on? #237237
    robwash
    Participant

    Re: Bosch WTE86304GB/05 drier filter light on?

    Thanks for the reply. I’m still scratching my head wondering why you have replied as you haven’t answered the Question. cheers for nothing

    December 18, 2007 at 12:07 am in reply to: Bosch WTE86304GB/05 drier filter light on? #237235
    robwash
    Participant

    Re: Bosch WTE86304GB/05 drier filter light on?

    any help please?

    December 16, 2007 at 12:01 pm in reply to: whirlpool 3RLSQ8033 W/M brake sticks #237132
    robwash
    Participant

    Re: whirlpool 3RLSQ8033 W/M brake sticks

    Hi. I would say change the brake. when on spin the brake is disengaged. Is the white plastic pointy thing on the brake loose? If it feels loose, it is broken. you have said about a pause in the spin cycle. There is no pause in the spin cycle, so if there is, you may have a timer problem. I have changed many a timer for not spinning. Good luck sir

    November 22, 2007 at 12:02 pm in reply to: indesit WD12SUK washer drier door seal? #235101
    robwash
    Participant

    Re: indesit WD12SUK washer drier door seal?

    cheers for that. I think I have a hard job in store. tanx rob

    November 20, 2007 at 6:34 pm in reply to: Whirlpool pcb query #234629
    robwash
    Participant

    Re: Whirlpool pcb query

    sounds like a software from front panel not tallying

    November 19, 2007 at 10:55 pm in reply to: Whirlpool pcb query #234627
    robwash
    Participant

    Re: Whirlpool pcb query

    I would just fit them and wait. it only takes about 20 mins to do the defrost cycle and by then you would find out if CF (communication failure)happens. This only takes 10 mins max to find that out anyway. This also gives you enough time to test that the ice maker is working…hopefully. I love these fridges…easy peasy…good luck

    November 19, 2007 at 7:04 pm in reply to: Whirlpool pcb query #234624
    robwash
    Participant

    Re: Whirlpool pcb query

    Hi sorry but the 481221778213 board is for LED models. 481221778217 is for LCD display models. If all the boards you have look similar, they can only be for these models. However there has been a software change so some of your boards may not tally up with the newer models. The front display board communicates with the rear control board. I hope this helps. It sounds like you may have some swapping and changing to do. good luck Rob

    November 19, 2007 at 6:55 pm in reply to: AEG F86070v1 dishwasher???? fault diagnosis query #234528
    robwash
    Participant

    Re: AEG F86070v1 dishwasher???? fault diagnosis query

    I’ll just fit an element and see what happens i think. cheers anyway. rob

    November 19, 2007 at 12:34 am in reply to: AEG F86070v1 dishwasher???? fault diagnosis query #234526
    robwash
    Participant

    Re: AEG F86070v1 dishwasher???? fault diagnosis query

    Hi, this machine is electronic and has no timer. Its fully intergrated and has user board and power board.

    November 1, 2007 at 6:45 pm in reply to: Whirlpool AWM6140/3 #232647
    robwash
    Participant

    Re: Whirlpool AWM6140/3

    I do sub-contract work for them so I’ve got all the data. send me your fax no and i’ll send you the page with all the lights and faults. It should be on sios but this is easier.

    October 31, 2007 at 4:20 pm in reply to: Whirlpool AWM6140/3 #232644
    robwash
    Participant

    Re: Whirlpool AWM6140/3

    sorry 1 question. Whats the spin speed of the machine? zero and 4th light up is F9 and zero and 3rd light up is F5 ntc failure

    October 31, 2007 at 4:18 pm in reply to: Whirlpool AWM6140/3 #232643
    robwash
    Participant

    Re: Whirlpool AWM6140/3

    hi…F9 = overfill. check pressure bottle and pressure switch

    October 31, 2007 at 4:16 pm in reply to: Diplomat 8702 washer drier not spinning #232611
    robwash
    Participant

    Re: Diplomat 8702 washer drier not spinning

    thankyou very much. I’ll change both anyway at that price. cheers men

    October 30, 2007 at 11:33 pm in reply to: Engineer available in Beds, Herts, Berks, Middx #229433
    robwash
    Participant

    Re: Engineer available in Beds, Herts, Berks, Middx

    Hi, Have you thought about sub-contracting?

    October 16, 2007 at 5:37 pm in reply to: Teka ADW659 F1VR02 Dishwasher cuts out on start #231158
    robwash
    Participant

    Re: Teka ADW659 F1VR02 Dishwasher cuts out on start

    no lights flashing. it just goes to start. pump comes on for 1/2 sec and 2 x bleeps. does the same again a few secs later. i always thought with an E2 the 1st 2 lights flash. cheers

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 106 total)
1 2 3 4 5 6 7 8