Forum Replies Created
-
Posts
-
Re: smeg DWI710E1 dishwasher
yes. waited and waited….i’m now older…it doesn’t matter now…thankfully the cux was a nutter so i’m not going back but cheers for reply. rob
Re: Hotpoint WD51p noisy and lights flash
Checked motor and ok. The on/off switch sounds realistic as it is taking time to lock the door switch. cheers will try that.
Re: Whirlpool oven AkZ146/IX 858514615020
hi…it can only be the control board. remember to follow install instructions as you may have to cut 3 reststors b4 u turn it on. cheers rob
Re: Ignis ADL347 Dishwasher 11 flashes
hi. even if you have checked the switch it has to be changed. i’ve had this fault many times and it is this. not a control board. i know this is hard to understand but its true. cheers rob
Re: Ignis ADL347 Dishwasher 11 flashes
F11 is the WI membrane switch. forget the module. even if yiu think the membrane switch is ok …it isn’t. part no.481227128407
Re: Bosch Dishwasher keeps filling
sorry mate but not quite understanding you. i understand there is a module that is doing a timed fill. are you telling me that is what is needed? if so have you got a part number please. many thanks rob
Re: Bosch Dishwasher keeps filling
hi…fitted float and ok, but customer has rang back and its still overfilling. any ideas please?
Re: Have I got two problems?
thats ok. i put my sams unit in these all the time and i never know what ones have got it and what ones don’t. i think the individual fault diagnosis came out in about 2001 sometime. probably a heating problem anyway. or a control board, or a membrane switch, drying problem or a leak lol who knows???? cheers rob 😀
Re: Whirlpool ADP8940
F8 is a very common fault for over foaming. has the pipe for the top spray arm come out? if so, you will need a new sieve cover. are you double dosing rinse aid? i.e. using 5 in 1 tablets and rinse aid. if so, stop using rinse aid. also is F8 is for syphoning so make sure drain hose is high enough and not pushed all the way into a down pipe for draining. it can also happen if a pot turns over. can also be motor gushing. it is the hardest fault on a whirlpool d/w. good luck. thats everything i’ve done to clear the fault…. never a control board.
