[robwash]

Re: Whirlpool AWM8163 F11

hard to say but its sounds like the F11 is from the lack of tacho action. if you have a motor, no harm in plugging one in. If its coming up with f11, it sounds like the timer is ok. cheers

[robwash]

Re: Whirlpool AWM8163 F11

Hi, try connections on ribbon cable between timer and control module. If no joy…new timer/power board

[robwash]

Re: whirlpool awo9663 f11

F11= timer/power board. Although sometimes F11 can be cured by cleaning connections on ribbon cable. Or if you have a S.A.M. unit, you can try and reprogramme the eprom. Both of these things can cure this. If you have to order anything, order timer. The control module is just a flash switch. cheers Robwash

[robwash]

Re: Smeg D/W DD612SC not heating again please

Thankyou very much, cheers all

[robwash]

Re: Smeg D/W DD612SC not heating again please

cheers, thought as much. Thanks a lot

[robwash]

Re: whirlpool awz231 t/d

exhaust stat at front…you need a torx. if its open circuit…change it. cheers

[robwash]

Re: LG fridge freezer warm in fridge

Hi, so if i change it, will it go into defrost?

Lucky Goldstar

[robwash]

Re: Whirlpool AWZ7303 Condensor Dryer. Filter light comes o

Hi, the filter light comes on if the green stat at the back loses continuity. I’ve had this many times. You need a stat kit part no.481225928681
cheers Robwash

[robwash]

Re: bauknecht d/w GSF2140

I can’t remember if this is a free standing model..if it is, is the drier fan running?
cheers rob

[robwash]

Re: Whirlpool AKZ146/IX (858514615020) oven not starting

HI, yes thats right. When you 1st turn the power on to these ovens…its says stop. then you press the button 2 or 3 times until the triangle is flashing in the bottom right hand corner. you then set the time with the right hand push dial/temp selector. once you’ve set the time you then press the button…clock set… when you start the oven you don’t touch the button…thats why it can only be the power board. when you select fan oven, it will start at 160c and you use the right hand dial to adjust temp. hope this helps.. Rob

[robwash]

Re: AEG T57560 condenser drier no heat

cheers mate

[robwash]

Re: AEG T57560 condenser drier no heat

Any help please?

[robwash]

Re: PRIMA BUILT-IN OVEN 828 x or 828/x

Should be a Whirlpool. No peculiars. part no. 481925928823 circa element

[robwash]

Re: Whirlpool D/W ADG7340 not washing

Hi, Yes I know he said that, but I have to say that when I came across this, it was a recall from another engineer who had fitted a new motor. It sounds like the same thing to me. cheers Rob

[robwash]

Re: Whirlpool D/W ADG7340 not washing

i’ve had this….spray pump motor

[Author]

Posts