rocker

Forum Replies Created

Viewing 15 posts - 976 through 990 (of 1,132 total)
1 2 3 … 65 66 67 … 74 75 76
  • Author
    Posts
  • December 9, 2007 at 1:42 pm in reply to: whirlpool (usa) Top loader #236658
    rocker
    Participant

    Re: whirlpool (usa) Top loader

    Greg, this is not protected by 13amp fuse,as its direct wired from fuse board via switch only. So need to fit correct fuse. Do connect sell these fuses or where !!. cheers John

    December 6, 2007 at 11:53 pm in reply to: Bosch SGS53A02GB/42 #236450
    rocker
    Participant

    Re: Bosch SGS53A02GB/42

    thank for all your help gents..John

    December 6, 2007 at 10:08 pm in reply to: Bosch SGS53A02GB/42 #236439
    rocker
    Participant

    Re: Bosch SGS53A02GB/42

    sorry I meant when the side tank.water level mirco is unpluged

    December 5, 2007 at 9:03 pm in reply to: Hotpoint WD860P #236250
    rocker
    Participant

    Re: Hotpoint WD860P

    Cheers for advice kiddo66 will check this out. John.

    November 30, 2007 at 9:57 pm in reply to: Bernstein 9941 8304 #235850
    rocker
    Participant

    Re: Bernstein 9941 8304

    I understand that caremark carry spares for this brand.

    November 20, 2007 at 5:12 pm in reply to: Zanussi ZWF1221W #234765
    rocker
    Participant

    Re: Zanussi ZWF1221W

    OK Martin point taken,will be going thursday A.M. If I need advice can I contact you from the job via e-mail, will that be ok by you. let me know.
    John.

    November 20, 2007 at 4:10 pm in reply to: Zanussi ZWF1221W #234763
    rocker
    Participant

    Re: Zanussi ZWF1221W

    Martin,
    customer tells me the interlock engaged, all normal lights came on, machine started then when stright to end of cycle, no lights flashing.
    John

    November 17, 2007 at 11:14 pm in reply to: Capacitor values #234434
    rocker
    Participant

    Re: Capacitor values

    Eastlmark & Greg, Many thanks for your advice. John.

    November 17, 2007 at 7:19 pm in reply to: Capacitor values #234431
    rocker
    Participant

    Re: Capacitor values

    cheers Chris, glad I asked before fitting. John.

    November 5, 2007 at 10:06 am in reply to: Maytag MAF8805AES #232807
    rocker
    Participant

    Re: Maytag MAF8805AES

    Thanks gents for your advice will look into this. John

    November 2, 2007 at 9:28 pm in reply to: Aeg Pnc 91123412801 D/W #232831
    rocker
    Participant

    Re: Aeg Pnc 91123412801 D/W

    Thanks Chris. John

    October 31, 2007 at 11:01 pm in reply to: Siemens Enr WD61400GB/13 #232706
    rocker
    Participant

    Re: Siemens Enr WD61400GB/13

    cheers Greg, will check this out. John

    October 31, 2007 at 8:06 pm in reply to: Rangemaster 6237 #232665
    rocker
    Participant

    Re: Rangemaster 6237

    Cheers Andy, will ring tomorrow. John

    October 27, 2007 at 11:36 pm in reply to: Bosch SGV5303GB/13 #232301
    rocker
    Participant

    Re: Bosch SGV5303GB/13

    cheers gents for your advice, will check these out.
    John

    October 27, 2007 at 12:43 pm in reply to: Bosch SGV5303GB/13 #232298
    rocker
    Participant

    Re: Bosch SGV5303GB/13

    Clive, no sorry mate, not the lever.. the water level appears normal.
    havent taken sray arms apart. cheers John.

  • Author
    Posts
Viewing 15 posts - 976 through 990 (of 1,132 total)
1 2 3 … 65 66 67 … 74 75 76