rocker

Forum Replies Created

Viewing 15 posts - 1,051 through 1,065 (of 1,132 total)
  • Author
    Posts
  • in reply to: Aeg 914 601 605 #206713
    rocker
    Participant

    Re: Aeg 914 601 605

    Martin, Many thanks for info..job sorted. Cheers John.

    in reply to: bosch WTL 5400 Con-dryer #205360
    rocker
    Participant

    Re: bosch WTL 5400 Con-dryer

    gegsy wrote:Hi
    Im guessing its this WTL5400/GB/01, as I cannot see an 11 index.

    The fault you are getting is indicating a a fault with the (R2) NTC, which is situated above the heater.
    This NTC looks at the temp of the air feeding the drum. Check connections etc before ordering.
    I cannot see this as spare, so it may come with heater :con:

    Greg

    Thanks Greg,
    will check this out…

    Cheers
    John.

    in reply to: bosch WTL 5400 Con-dryer #205358
    rocker
    Participant

    Re: bosch WTL 5400/GB11 Con-dryer

    Greg, . Model WTL5400/GB/11 cupboard dry light flashing and bleeping .customer thinks its about 10 yrs old.

    in reply to: Bosch wfx3267gb/01 #203479
    rocker
    Participant

    Re: Bosch wfx3267gb/01

    had 240v power to interlock, fitted new lock, didnt cure fault, had to walk away.next step pcb’s. John

    in reply to: bosch dish washer #204209
    rocker
    Participant

    Re: bosch dish washer

    Cheers Pinky & Martin, thanks for your advice, the machine is about 10yrs old, so Martin’s suggestion is possibly correct.
    Cheers John

    in reply to: Beko WMA 1715S #204068
    rocker
    Participant

    Re: Beko WMA 1715S

    well done Bazza- reset, all ok now cheers John.

    in reply to: Beko WMA 1715S #204067
    rocker
    Participant

    Re: Beko WMA 1715S

    many thanks to all you gents for your help, will try to reset first, if no joy will sent to tony at emw for repair. John

    in reply to: Bosch SGS56E02GB/35 #203707
    rocker
    Participant

    Re: Bosch SGS56E02GB/35

    Been back today,machine runs cycle then empties then restarts the same programe over again. feel it may be pcb, but not sure!!!! can any bosch engineers advise please. John

    in reply to: replacing door hinge on servis m6513s #203521
    rocker
    Participant

    Re: replacing door hinge on servis m6513s

    I did a hoover recently and came with rivets,( but not sure about servis) you only need a drill and rivet gun,takes 10 mins.(rivets cheap to buy)
    Cheers John

    in reply to: Bosch wfx3267gb/01 #203478
    rocker
    Participant

    Re: Bosch wfx3267gb/01

    Chris, dont know, customer told me about fault on phone, havent called yet. part is cheaper than I thought so will try this. cheers john.

    in reply to: new type hotpoint door gasket fitting !! #202875
    rocker
    Participant

    Re: new type hotpoint door gasket fitting !!

    recently done a Indesit with this type band, although a useless item..did manage to refit by getting lower hook into slider unit, tapped into position with long screwdriver worked for me.
    John

    in reply to: Baukneckt Dishwasher #202261
    rocker
    Participant

    Re: Baukneckt Dishwasher

    cheers ali-p,
    I have removed top basket to test, it must be the hinges, I didnt know how to check theses, but I do now, thanks for your help.
    Cheers John.

    in reply to: Bosch SMS6502GB/07 – Please Help. #201456
    rocker
    Participant

    Re: Bosch SMS6502GB/07 – Please Help.

    Greg. many thanks for your help, just what I needed.
    Cheers John

    in reply to: Bosch WFG2020/GB01 #199694
    rocker
    Participant

    Re: Bosch WFG2020/GB01

    Thanks to Eastlmark & Greg for your help & advice
    John

    in reply to: Tecnik single oven TKC201 #199353
    rocker
    Participant

    Re: Tecnik single oven TKC201

    Cheers Dave, have ordered element, good price, even without discount, will open up account as they seem to have more stock than wash- vac
    John.

Viewing 15 posts - 1,051 through 1,065 (of 1,132 total)