Forum Replies Created
-
Posts
-
Re: AEG L16810 Motor Got No Go.
The GEC Hotpoint motors used to suffer from that problem now and again.
Re: Diplomat select 110 AHY4310 / 13
Maddox/Europart 01443 743370 are Hygena/Diplomat spares agents. Or you can go direct to MFI spares dept. 01603 630256.
Re: Diplomat select 110 AHY4310 / 13
It’s not one of those ovens where you have to turn the oven thermostat on as well as the grill regulator is it? I’ve been caught out by that before now on Bernstein ovens, I think it was, where the customer complained of no grill operation, and on tracing the circuit through found the oven stat in series with the grill regulator and element.
Re: De Dietrich Dishwasher VW8888U1/1
They’ve changed it since I spoke to them earlier. It definitely said ‘upper/lower spray arm’, and listed 32X1051 as the upper arm. Well, does anybody know the part no. for the lower arm?
Re: Hotpoint FF200E Fridge Freezer
Thanks Jonny. I went back into Partfinder armed with that info and there is a window that tells you about it.
Re: Where there’s a WIL there’s no way!
canufixit wrote:
roly16 wrote:
TO THE TIP WITH IT ! 💡canufixit
Tip? Your tip is a registered WEEE acceptance site is it? 😯
yes weee are 😉 , and there are lots of its family,that are there also, so it will not be lonely 😆
I’m sure it won’t 😀
Re: Where there’s a WIL there’s no way!
canufixit wrote:TO THE TIP WITH IT ! 💡
canufixit
Tip? Your tip is a registered WEEE acceptance site is it? 😯
Re: Madonna the beach babe (exclusive picture) 8)
Madmac wrote:Dream on ! NOBODY who deals with the general public every day lives to 85! 😉
That depends on how he deals with them :pirate: :snig:Re: Madonna the beach babe (exclusive picture) 8)
effzedarr wrote:Urghh,i’ve seen these pics before & some of ’em are photos from the front! Not nice,not nice at all,the phrase “Roof tilers nail bags” springs to mind! 😳 😡
Careful, you’ll be 85 one day 😀
Re: Boyo it’s tough being Welsh?
r600a wrote:Hi
Nah.. this is the best !!
Bryan
Nah! Bring back Max Boyce. He was really funny and he sang good songs too.
Geoff
Re: Creda W200FW Control Board
I changed one today. The configuration is easy; just follow the instructions on the sheet. The old board I have is scrap if it’s any use to you instead of buying a new one.
Geoff R
Re: Whitegoods February Meeting
And thanks from me too for all the hard work put in by Ken and his team for making it another interesting meeting, and two great nights.
Geoff
Re: Hotpoint Fridge-freezer RF64
Thanks for the help guys. Yes, I realised that the problem had been there for the length of the winter when somebody suggested ambient temp. problem, but it hasn’t been cold every day. The very low back pressure I think is significant. I’m going back this evening armed with a new bottle of refrigerant [I’d run out when I was there the other day] and will report back in due course.
Look forward to seeing you guys on Thursday/Friday.
