Forum Replies Created
-
Posts
-
Re: Hotpoint washer dryer wdl 520p
Hi George.YES the susp legs are ok-nothing wrong with them at all.fault lies with an electrical issue.Spin prog ok ie spider arms not cracked-should think not at 2.5 years old.
Re: belling integrated dishwasher
Yes i had this problem of no heat on whatever prog i set it on.I by passed the heaters m/swt-the part you mention,and tried it -now works fine on all programmes.I didn`t mess about with the p/swt however.I told the customer on no account do you accept the repair if it is still wrong-never phoned back,so presume it worked out ok.
Re: **KNOWN ERROR CODES**
Electrolux dishwasher ESI 6105
Continuous flashing of the “start/cancel” indicator light and 1 flash of the “end of cycle” indicator light…..The machine does not fill with water.
Continuous flashing of the “start/cancel” indicator light and 2 flashes of the “end of cycle” indicator light…..The dishwasher will not drain.
Continuous flashing of the “start/cancel” indicator light and 3 flashes of the “end of cycle” indicator light…..Anti-flood device is activated.
Re: zanussi zwx1506w washing machine
Will check today.Thanks for your advice.Will let you know the outcome.
Re: zanussi zwf1506w washing machine
It is a zwf1506w not a zwx.No that is one thing i didn`t do that is an insulation test on the element but am going back tomorrow to have another poke about at the m/ch so will check then
Re: Amica Parts Quick Ref
Useful info thanks alot.Amica awp510 is made in The Peoples Republic Of China…………..so there you have it,a triumph of post revolutionary thinking!!
Re: boche washer dryer wft2800gb/13
Problem solved-was just the airtrap blockage afterall that;one of those ones that sometimes o/fills and some times deosn`t.Thanks for suggestions.
Re: boche washer dryer wft2800gb/13
Yep that`s what i thought but nothing shows up that the valves are at fault.Actually had a phone call back from customer saying they forgot to tell me that a 3 appears in the time delay led when it goes wrong(God give me strength!!) so maybe this means something to someone.I go back thewre tomorrow.I think machine might be o/filling when clothes are in m/ch ,untill then anyone got a better idea please let me hear it.Thanks
Re: Hotpoint washer dryer WD420P
sussed it-nothing to do with the lights as quoted flashing as she told me the wrong lights-i give up!!!!Asked her if the dryer actuallly dried anything and she said it didn`t-shame she didn`t telll me before!Actual problem was the dryer vave solenoid o/circ;simple as that.Problem now solved ,thanks for everyones suggestions.
Re: Hotpoint washer dryer WD420P
Thanks for your reply.I agree with you that it is probably the pcb though i was hoping ,of course ,it wouldnt be,c`est la vie.Anyone elses imput more than welcome before i break the dreaded news to my customer next week.Thanks in anticipation.
Re: bosch dishwasher sgs43a22gb/01 sumps floating sensor
Thanks Nomadpaul for your help,problem can now be sorted out.Andy
Re: bosch dishwasher sgs43a22gb/01 sumps floating sensor
Thanks but looked up 483487 and this is the mushroom anti o/fill part not the part i`m after which is somewhat elusive depite a break down parts diagram via bosch web site-part i`m after is a sliding up and down with water level floating sensor one half is clear `other half is a grey colour and fits into the sump at the front-there is a plastic detatchable cover that is clipped into the sump over this float.any ideas as to the part number please as i cannot find this part listed which is kinda wierd.
Re: bosch dishwasher model sgs56e12gb/01
Thanks to all-yes it was the filljug meter thing that was u/s-so problem now sorted out.Took the old part to pieces ,no that there is much to it,God knows what was wrong with it as the vains went round and that pull out terminal block sensor measured through-weird,but that`s domestic appliances for you.!!
