Simon46

Forum Replies Created

Viewing 15 posts - 1,996 through 2,010 (of 2,216 total)
1 2 3 … 133 134 135 … 146 147 148
  • Author
    Posts
  • June 19, 2005 at 12:26 am in reply to: worst thing #138941
    Simon46
    Participant

    Re: worst thing

    Hoover with the water in it for 3 months. Black. Coin jammed in pump. Binbags from the front door to the hallway. Very sad looking child in house.

    June 18, 2005 at 1:31 pm in reply to: Electra 1100b wont fill with hot or cold water #138148
    Simon46
    Participant

    Re: Electra 1100b wont fill with hot or cold water

    This is pointing at the pressure switch. If the machine thinks it is full of water it will not spin. It will also not fill. The downside is also it will switch the heater on with no water in the drum possibly blowing element or setting fire to the clothes. Pressure switch contacts must be stuck in the closed position for some reason or welded together. is temperature set to 0?

    Simon

    June 17, 2005 at 3:21 pm in reply to: Ancient AEG lavamat 561 timer knob #138718
    Simon46
    Participant

    Re: Ancient AEG lavamat 561 timer knob

    Yes thank you for info martin. Unfortunately my supplier said it came up obsolete, so had to glue knob on shaft as customers are too old to see how it goes in.

    Regards
    S.

    June 17, 2005 at 12:59 pm in reply to: Zanussi FLE1115w flashing main wash and end #138722
    Simon46
    Participant

    Re: Zanussi FLE1115w flashing main wash and end

    Thanks Martin. Has been working a year now.

    S.

    June 17, 2005 at 12:04 pm in reply to: Ancient AEG lavamat 561 timer knob #138716
    Simon46
    Participant

    Re: Ancient AEG lavamat 561 timer knob

    Dave can you get me one.

    Regards
    Simon.

    June 16, 2005 at 7:59 pm in reply to: Hotpoint Con/Tum/Dryer #138617
    Simon46
    Participant

    Re: Hotpoint Con/Tum/Dryer

    Relay.

    June 15, 2005 at 12:57 pm in reply to: Zanussi ZDT 6894 no fill #138294
    Simon46
    Participant

    Re: Zanussi ZDT 6894 no fill

    Does it come complete with new IWMS?

    S.

    June 14, 2005 at 8:28 pm in reply to: hpt 8596p no evap fan #138387
    Simon46
    Participant

    Re: hpt 8596p no evap fan

    when evaporator temp drops. can be a long wait with customer over shoulder.

    June 14, 2005 at 8:14 pm in reply to: hpt 8596p no evap fan #138385
    Simon46
    Participant

    Re: hpt 8596p no evap fan

    Usually Evap thermistor. Unplug fridge switch on with door open fan will run for 1 second proving feed o.k.

    S.

    June 13, 2005 at 9:05 pm in reply to: Zanussi ZDT 6894 no fill #138292
    Simon46
    Participant

    Re: Zanussi ZDT 6894 no fill

    Just for interest put my fairy liquid sink washed plates to test dishwasher hotpoint BFI62 (indesit). listen to that wash pump churn that foam and watch the undertray fill with water.

    S.

    June 13, 2005 at 8:59 pm in reply to: Bosch SGS5312GB/12 doesn’t stop or drain #138297
    Simon46
    Participant

    Re: Bosch SGS5312GB/12 doesn’t stop or drain

    How is it on the quick wash?

    Simon.

    June 13, 2005 at 8:53 pm in reply to: Zanussi ZDT 6894 no fill #138289
    Simon46
    Participant

    Re: Zanussi ZDT 6894 no fill

    John
    Have “trained” customer in dishwasher care but notice a box of finish 3 in 1 tablets in cupboard. Could this be causing problem? job to be done in garage anyway.

    Thanks for list
    Regards
    Simon

    June 13, 2005 at 8:46 pm in reply to: Zanussi ZDT 6894 no fill #138288
    Simon46
    Participant

    Re: Zanussi ZDT 6894 no fill

    Cheers Chris.

    June 8, 2005 at 3:04 pm in reply to: Whirlpool ADG957 door falls off #137801
    Simon46
    Participant

    Re: Whirlpool ADG957 door falls off

    Thanks Kevin. Another dodgy installation (siliconed sides of appliance to cupboards as well).

    June 7, 2005 at 4:59 pm in reply to: Hotpoint / Creda tumble dryers/W-dryers not heating #129322
    Simon46
    Participant

    Re: Hotpoint / Creda tumble dryers not heating

    Is there a new part no for this kit?

    S.

  • Author
    Posts
Viewing 15 posts - 1,996 through 2,010 (of 2,216 total)
1 2 3 … 133 134 135 … 146 147 148