[Simon46]

Re: Zanussi ZEBF249W icing up

Thanks subs will try timer and see.

Regards
S.

[Simon46]

Re: Miele t220 drier seal

:rotfl:

[Simon46]

Re: Miele t220 drier seal

Thanks clayside. Is it to be ordered from miele direct?

Regards
S.

[Simon46]

Re: Miele t220 drier seal

Can anyone help?

Regards
S.

[Simon46]

Re: AEG Competence fan oven motor

Ok Ta Chris.

S.

[Simon46]

Re: Advice on Hotpoint RLA21 – leaking

Then it is blocked with something still. How far are you pushing down the hole? There is a tube attached to the hole.

Regards
Simon

[Simon46]

Re: The strangest thing you can find in a blocked pump

Squeezed sump hose to check for blockages on indesit. Needle lodged sideways in hose went into hand 😯 . Luckily i wear latex gloves. Pierced hand but not glove. Was happy to find it was the sewing type 😀

S.

[Simon46]

Re: SORRY YET ANOTHER SAMSUNG RS21DCNS

The defrost components should be tested with a multimeter whilst evaporator cover is off. Then fault is proven with no doubt. Use Repairs@ link on lhs of page for one of our engineers.

regards
Simon

[Simon46]

Re: Whirlpool Fan oven element

ELE 6336 Zan 3 turn 🙂

S.

[Simon46]

Re: PAT Test failure

Has it possibly dried out now?

S.

[Simon46]

Re: Miele W842 Novotronic Spoelen light flashing/no earth

Thank you for your help Baron

Best Regards
Simon

[Simon46]

Re: noisy candy

Could try a power off/ door open overnight defrost if it is Ice buildup contacting fan blades.

Regards
Simon

[Simon46]

Re: Hotpoint Ultima WT940 – damp smell

Very good 😀

S.

[Simon46]

Re: Hotpoint Ultima WT940 – damp smell

Try here in advice and help
http://www.ukwhitegoods.co.uk/modules.p … age&pid=43

Regards
Simon

[Simon46]

Re: Candy C514

Remove draw and clean.Syphon blocked usually.

Regards
Simon

[Author]

Posts