Forum Replies Created
-
Posts
-
Re: Hotpoint ctd 00p bearing collapsed
ive replaced dozens of em but none lasted just a few weeks !! no QC that day i reckon IRENE
Re: beko WMB 51021W drains for 5 seconds 3 second spin
Cheers
Sent from my HTC One mini 2 using Tapatalk
Re: beko WMB 51021W drains for 5 seconds 3 second spin
Yeah no problem with the solder Dave but I don’t have any Beko boards is the triac the flat rectangular component sometimes a small hole I. The side with 3 legs ?
Sent from my HTC One mini 2 using Tapatalk
Re: beko WMB 51021W drains for 5 seconds 3 second spin
Hi Dave mchecked tacho generator continuity there and intermittent when turning the shaft i take it thats ok , the triac is gonna be a new board i guess and at 70 euros i could take a chance cheers mate
Re: bosch waq28461gb12
Did you check interlock , pcb for burning
Sent from my HTC One mini 2 using Tapatalk
Re: Neff dishwasher door won’t lock
Thanks everyone for the info it had a granite worktop dishwasher secured at the sides on top it had moved slightly back into the units and while the door was hitting the lever to activate the lock it wasn’t in far enough to catch the dent in the door
Sent from my HTC One mini 2 using Tapatalk
Re: creda c 361 eg hob element not regulating
Cheers Martin Will order a new one
Sent from my HTC One mini 2 using Tapatalk
Re: Indesit sixl 145 s UK taking water during a wash
yeah checked tube and switch and chamber im gonna order a pressure switch anyway cause its the weakest link
Re: hotpoint wd420 long cycle
Must have hit the post button 2ice cheers
Sent from my HTC One mini 2 using Tapatalk
Re: hotpoint wd420 long cycle
iadom wrote:Syphoning, poor fill, OOB, customer error??
Have you actually timed it yourself? I had exactly the same complaint on a WD420 only last week. checked everything out, set it to a 40 degree wash and it took 1hr 45 mins which is the time stated in the manual, not had a call back since.
Timed it today 2 hrs 10 mins for a fast wash, I also checked element all seemed ok , but after 8 mins the power dropped off at the element , nothing there so the water got to maybe 15 degrees fast wash should hit 30 I checked the dial on the program panel that’s ok set at 40 , then I checked the ntc and it reads 15 k ohms at between 10 and 15 degrees Celsius , I don’t have any info on this one anyone know if that is correct resistance , element checks out ok also 38 ohms thanksiadom wrote:Syphoning, poor fill, OOB, customer error??
Have you actually timed it yourself? I had exactly the same complaint on a WD420 only last week. checked everything out, set it to a 40 degree wash and it took 1hr 45 mins which is the time stated in the manual, not had a call back since.
Timed it today 2 hrs 10 mins for a fast wash, I also checked element all seemed ok , but after 8 mins the power dropped off at the element , nothing there so the water got to maybe 15 degrees fast wash should hit 30 I checked the dial on the program panel that’s ok set at 40 , then I checked the ntc and it reads 15 k ohms at between 10 and 15 degrees Celsius , I don’t have any info on this one anyone know if that is correct resistance , element checks out ok also 38 ohms thanksSent from my HTC One mini 2 using Tapatalk
Re: hotpoint wd420 long cycle
iadom wrote:Syphoning, poor fill, OOB, customer error??
Have you actually timed it yourself? I had exactly the same complaint on a WD420 only last week. checked everything out, set it to a 40 degree wash and it took 1hr 45 mins which is the time stated in the manual, not had a call back since.
Timed it today 2 hrs 10 mins for a fast wash, I also checked element all seemed ok , but after 8 mins the power dropped off at the element , nothing there so the water got to maybe 15 degrees fast wash should hit 30 I checked the dial on the program panel that’s ok set at 40 , then I checked the ntc and it reads 15 k ohms at between 10 and 15 degrees Celsius , I don’t have any info on this one anyone know if that is correct resistance , element checks out ok also 38 ohms thanksSent from my HTC One mini 2 using Tapatalk
