Forum Replies Created
-
AuthorPosts
-
stevebunyan
Participantunpaid
Well I never, the things you learn on here,
The law is truly an ass when a customer who owes you money can claim harassment by you, the hard working engineer, when you demonstrate your intent to prosecute.
Thanks for the advice though, it is gratefully revived.
Sent from Steves
iPhone using Tapatalkstevebunyan
ParticipantLG WM12235FB
Have you rebooted the control mod. Turn off at the wall wait a short while and the turn back on.
Not saying it will work but has cured a number of problems on these for me.
Sent from Steves
iPhone using Tapatalkstevebunyan
Participantunpaid
Informing a customer of your intent to proceed with legal proceeding is not intimidation, is part of the necessary legal procedure that the courts expect you to follow before you submit a claim.
Sent from Steves
iPhone using TapatalkMarch 28, 2012 at 7:20 pm in reply to: Working on Dual fuel range cooker – Gas Safe registered? #372106stevebunyan
ParticipantWorking on Dual fuel range cooker – Gas Safe registered?
I wonder how many of us record earth loop impedance, earth continuity and insulation resistance values after we have worked on an electrical appliance? Same appliance if a fault occurs on gas as electric. Can we prove there was no fault when we walked away from the job.
Sent from Steves
iPhone using Tapatalkstevebunyan
ParticipantCommercial Dishwashers
Jets was my first thought so cleaned them all but made no difference. Should they point up or in different direction?
Sent from Steves
iPhone using Tapatalkstevebunyan
ParticipantAny answers?
What was your original question?
Sent from Steves
iPhone using Tapatalkstevebunyan
Participantrapport
Should I have said 32bit? What’s a couple of bits between friends.
Sent from Steves
iPhone using Tapatalkstevebunyan
Participantrapport
I still am unable to get past error code so have asked a freind hows a programmer to see if he can make it work. He tried every thing with no success so down loaded on to one of his machines and got it working first time. The difference was his machine running 34bit mine 64bit.
Sent from Steves
iPhone using TapatalkMarch 27, 2012 at 8:49 pm in reply to: Working on Dual fuel range cooker – Gas Safe registered? #372097stevebunyan
ParticipantWorking on Dual fuel range cooker – Gas Safe registered?
So does that mean that I, a non gas safe engineer can change them?
Sorry,yes I realised you where gas safe after I posted re disconnecting bayonet when I re read your post.
Sent from Steves
iPhone using Tapatalkstevebunyan
ParticipantCommercial Dishwashers
Thanks for that, Ill check.
I have noticed that when it fills from empty the top arm of the two spins with filling water pressure? Does that mean any thing or is that normal?
Sent from Steves
iPhone using Tapatalkstevebunyan
ParticipantCommercial Coffee Machines
Any makes, I have come across a few. Currently working on a Gradisca Brasilia with twin group set.
Sent from Steves
iPhone using Tapatalkstevebunyan
Participantunpaid
I fill in a copy of the county court form and send them a copy with a covering letter giving them 7 days to pay up. Often does the trick.
Don’t lose sleep over these low life’s, they reap what they sow.
Sent from Steves
iPhone using TapatalkMarch 27, 2012 at 5:33 pm in reply to: Working on Dual fuel range cooker – Gas Safe registered? #372093stevebunyan
ParticipantWorking on Dual fuel range cooker – Gas Safe registered?
Thanks for that clarification Brian. You never know may save my bacon in the future.
Sent from Steves
iPhone using TapatalkMarch 27, 2012 at 5:31 pm in reply to: Working on Dual fuel range cooker – Gas Safe registered? #372092stevebunyan
ParticipantWorking on Dual fuel range cooker – Gas Safe registered?
Are thermo couples classed as electric or part of gas due to them being a safety device.
Currently we don’t do these even though they are very simple to replace?
Sent from Steves
iPhone using TapatalkMarch 27, 2012 at 5:21 pm in reply to: Working on Dual fuel range cooker – Gas Safe registered? #372089stevebunyan
ParticipantWorking on Dual fuel range cooker – Gas Safe registered?
According to my my gas safe engineer I can disconnect the bayonet connection with out being gas safe registered. I do pass gas jobs to said engineer but if I have turned up to effect a repair I don’t want to walk away from that hence giving the customer the option. Perhaps I could get clarification on that point from a registered member please.
Sent from Steves
iPhone using Tapatalk -
AuthorPosts
