[stevebunyan]

Working on Dual fuel range cooker – Gas Safe registered?

The way I stay with in regulations is when I come accross a job that may have potential of crossing over into gas safe territory is explain to the customer that I can do the repair but due to gas safe regs I can’t reconnect the appliance until it has been tested, is that ok? When I get the go ahead I disconnect at the bayonet and do the job and leave disconnected. I than phone my friendly gas safe engineer to re connect and every one happy.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Maytag not producing ice or water.

If you go to find an engineer on this site. You should find some one close to you.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Meneghini

Some people truly have more money than sense.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Chairman Statement

I for one would feel very isolated with out the WTA.
This valuable resource would not exist with out the hard work of the management team and personally I don’t know how you do it.
To then have unnecessary pressure add to the point of effecting your home life and no doubt your health is unacceptable.

So please accept my appreciation for every ones hard work and I hope this whole affair is in the past and we can all get back to enjoying the benefits of the WTA.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Re: Aeg 75238-GA1 freezer

PNC 922045851
S/N 54801209

[stevebunyan]

rapport

I keep getting the 404 error. Installed call handling first. When stock control is unzipped it gives the same file name to copy into C drive which will over write the file from call handling. Not sure what to do here. Also even though apache started. It’s not showing as running in services hence 404 error. I’m guessing port issues but not sure how to change it.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Standard Terms & Conditions Of Sale

Got it. Thanks guys

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Aeg 75238-GA1 freezer

The original has 2 black Lego brick size stats in line which makes me wonder.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Re: Standard Terms & Conditions Of Sale

Hi Ken
T&C’s Downloads but wont open, Adobe doesn’t recognise it.
Any suggestions?

[stevebunyan]

Aeg 75238-GA1 freezer

Thanks, do I read that right? That the new heater does away with the two inline stats.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Maytag not producing ice or water.

Have you been able to check that water is flowing through the filter and to the valve?
If it is then you will need to check the resistance of the valve by unplugging its connectors and testing through these terminals. You will also need to get tested that the valve is getting power on demand but would recommended you do this unless you are a competent person with regards to electrics.

Never test on a live appliance. Always remove the plug.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Zanussi aquacycle 1050 FLS 1183W won’t drain

The impeller should be a tight fit onto the shaft, if it isn’t then a new pump is required. There will be a little play laterally on the shaft.

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Approved Repair Engineer Pages

Hi Ken
Can you tell me how to set a page up please. I’ve been and edited my profile but can’t see any option to set a page up.
Thanks

Sent from Steves
iPhone using Tapatalk

[stevebunyan]

Re: Aeg 75238-GA1 freezer

Im struggerling to find the correct Evap Heater for this. The existing has 2 stats on it and the replacement according to Connect (5045170758073) doesnt.
Can any one point me in the right direction please.
Thanks in advance

[stevebunyan]

ew74 hotpoint

Over heat stats are closed until over heat temp reached then go open circuit until cools.

Sent from Steves
iPhone using Tapatalk

[Author]

Posts