[Steven]

Re: Indesit sealed tub

Thanks Jim, thought as much. Only Indesit could supply a drum assy complete with a differnt size shaft and expect you to know they have changed the size and you need the pulley as an optional extra.

If you search this model on connections model search it shows all seperates parts, doesnt even show a tub assy.

Steven

[Steven]

Re: Neff Induction Hob

Thanks

c/x – customer

[Steven]

Re: Samsung Rs20ccms

Temperature reading on the display -25 freezer +3 fridge, actual temperature inside -12 and +8, this is due to evaporator blocked with fluffy ice again approx a week.

Why if there is such a difference in the internal temperature the display does not show this?

All heaters ok, if a sensor faulty surely this would show a fault code?

I read somewhere that there a modification to the freezer evaporator covers when you get excessive frost build up, could be caused by fan not running properly similar to some twin cooling models is this correct?

[Steven]

Re: Neff Induction Hob

Only 18 mths old, not sure of the fd number but i would have thought most inductions would have the same spec for installation?

c/x has said does not mention the front vent only the overall cut out and if fitted above another appliance, it should say more surley, especially if the worktop is over 2 inches thick as this would mean the hob vent itself would be blowing straight into the frame of the worktop not allowing adaquate exhaust venting?

[Steven]

Re: Drawer line, integrated washing machine?

Jim

I think you will find it looks like only miele.
You could always tell them to do away with built in (unless the have a spare full height cupboard door laying around) and stick a nice ISE10 in its place its got its own semi door, they could always decorate it to match kitchen 😆

Steven

[Steven]

Re: Where to buy integrated appliances?

Swift electrical Stoke on trent
Inmans electrical Sheffield
Statesman appliances, severn distribution Glos

[Steven]

Re: Samsung Rs20ccms

Thanks 850

I will check those.

[Steven]

Re: MP’S Allowances

iadom wrote: they probably have the best ‘corporate’ pension scheme in the country .

MPs put very little in and get a massive return. (they probably claim that as an expense as well) :rolls:

We put too much in and get sweet FA when we retire, sums just dont add up. 😕

We just get shafted everytime.

Its the only job I know of that when you get sacked or resign, you dont actually leave the job you keep all of your privaliges and you just get another position within the organisation, sit in the background, keep quiet or move to another country for a few years at the tax payers expense, when the heat is off and they think you have forgotten what they did they come out the woodwork and become chancellor or something.
Never really understood that one. :hmm:

[Steven]

Re: JTM CONTRACTS AGAIN

spares@jtmcontracts.com
quinto@jtmcontracts.com
admin@jtmcontracts.co.uk

0191 3870778
0870 872 0791

Accounts
jtmaccounts@jtmcontracts.com

fax 01909 519250

The list goes on and on

[Steven]

Re: LG Strange Pump WM14311FD

leavemetogetonwithit wrote:Everything went in smoothly although the drain pump was still making an occasional hiccup noise on test which I decided not to worry about as I’m sure the customer will let me know if there’s a problem.

I don’t know why people are slagging off Askoll, they’re as good or better than Plaset for magnet pumps IMO.
Mike.

LG pumps for some reason always seem to stutter you would think theres a problem if you are not used to them.

Not slagging off Askol, have no objection in using them in the right situation.

[Steven]

Re: LG Strange Pump WM14311FD

Peter

An askol will fit, but dont recommend it on the recirc pump, as it runs longer it through the wash so requires one with toc.

Jtm do supply them direct from LG which maybe slightly cheaper than connect as they are the main agents.

Had a tech bullitin from JTM recently which an LG had caught fire due to an askol pump fitted, whether this was actually the cause no way of knowing as it could have had another fault contributing to this ❗

You get enough problems with thier pumps anyway so would fit a Gen one IMO. Why they really have to be that expensive is beyond belief, yet if someone pays between 500-800 for a LG washer then they should expect to pay a bit for the parts, should not be that way the parts are not worth that.

Steven

[Steven]

Re: Samsung Rs20ccms

The fan motor is working, thats the problem as the cooling is all done by the freezer, when the evaporator gets the fluffy ice forming it blocks the finns so the air does not blow through the evaporator hence the temp in to the fridge is affected.

Steven

[Steven]

Re: Samsung Rs20ccms

Any Suggestions

[Steven]

Re: Samsung Rs20ccms

Thanks Jim for moving it here

It was late, i try and pay a bit more attention next time:oops:

Steven

[Steven]

Re: Diplomat ADP8102/1 D/w

Thanks will order from Aw but just wanted to confirm those part numbers as they come up with a totally different description when entered in connect search?

Steven

[Author]

Posts