Forum Replies Created
-
Posts
-
Re: hotpoint ff65
Usually there is a small vent below and behind the evaporator for the return air that can get missed check its not blocked with ice.
Steven
Re: Is the failure rate still low?
Had a motor defect on one installed a couple days ago, only used a few times then had a call to say not working, went there to find the comm had split in half. Will bring it up to the meeting for inspection.
The only small problem I have had acouple of times is the inlet hose coller and stem is sometimes to long for the postion under the sink if the tap is at at different angle.
Steven
Re: WEEE
I have spoken to John yesterday regarding collection of appliances to be recycled, that we collected from customers after they have purchased new ones.
It includes some refrigeration and floorcare as it is all electrical wasteand recyclable, now John has said the goverment has changed the rules again and refrigeration is a problem to recycle.
We never used to bother with refrigeration as it was a problem to get rid of and always ask the customer to phone the local council, we only started taking back after checking few weeks ago with John on what we could get collected, as this added to his weight numbers against the ISE. Now we find we are stuck with the refrigeration. (Not blaming John as I know he is commited to the cause)Can we get it simplified in black and white what we can and cant collect, who is going to collect it free of charge on our behalf.
I thought it would be simple keep a few records make a phone call and get it collected now it seems we are being tied up in red tape again.
As if we haven’t got enough to deal with.Steven
Re: Polo shirts
Ken
Had a fax come through recently for clothing, worth a look some prices look resonanable
Just need to check set up charges.http://www.tradeservicedirect.co.uk
Steven
Re: Hotpoint FFA90
Sorry did not mean to confuse;
The F/F appears to be working normally as the temperature inside is reading what the set temp in the memory is displaying(-18-20) tested this by using a thermometer to check it, however the actual display reading 10-18 degrees less.( Looks like a display fault)Steven
Re: Polo shirts
Some general prices I have paid in the past for polo shirts vary from £8-£15 depending on supplier / logos / and quantity but the more you order I have seen the price as low as £5-£7 that why I thought by using ukw as a buyer then we could all benefit from the lower prices.
Once the set up charge for logo usally which is a one off payment for the logo etc that could be split between us.
Its finding a company that will also keep the cost low and to include the individuals names etc.
Re: Polo shirts
Ken
I was off last week so I was just checking to see if there is any news on the printing and logos?
I not trying to hurry you as I know your busy person.I may order a few spare shirts from the shop to be going on with.
The workwear companys you use would we be able to get trousers at a good rate like the shirts, as I think its time to renew mine.
StevenRe: Polo shirts
kwatt wrote:I don’t see why not Steven, John Mac did the donkey work on this a long time ago.
But if there’s interest I can probably get some branded up as we have more than a few here.
K.
If the shirts are already branded how easy would it be to get our own company names onto them, and would the workwear company do this for each of us.
If it is set up, would we order directly asking them for the whitegoods shirts and then send them our own logo to add on to it?
Re: Polo shirts
XXl size the most popular thats because there given to the wives for night shirts not because we’re all overweight :rotl:
Re: Diplomat D/w
Thought so, customer has given me a copy of the extracare job sheet with re programed written on they didnt charge him according to the paper work as it was under contract after all, now wants a refund from us after we checked it over also sent it off to QER for confirmation, I dont why he called us out in the first place if he knew he was getting a free repair.
