subs

Forum Replies Created

Viewing 15 posts - 226 through 240 (of 410 total)
  • Author
    Posts
  • in reply to: amana f/freezer #293366
    subs
    Participant

    Re: amana f/freezer

    The Amana filters ive done recently have been inside fridge top right hand corner. Filter housing drops down and you just twist and pull the filter, water shuts off automaticly.

    Subs

    in reply to: connects parts specification message #288838
    subs
    Participant

    Re: connects parts specification message

    Thats a pitch i would love to see on Dragons Den!

    Subs

    in reply to: Heat Resistant Wire? #293191
    subs
    Participant

    Re: Heat Resistant Wire?

    Thanks Guys!

    Subs

    in reply to: Bosch dishwasher SMS4462GB/03 #293229
    subs
    Participant

    Re: Bosch dishwasher SMS4462GB/03

    Probably dont help you much but i had exactly the same thing a few weeks ago. Would fill for rinse and stop. Checked all stats and everything and concluded timer. Customer did not go for it because of price so never new for sure.

    Subs

    in reply to: connects parts specification message #288836
    subs
    Participant

    Re: connects parts specification message

    Along a similar line, i was looking through Servevastdirects website for a dishwasher part and came across something described as a “TURDISITY SENSOR”

    Subs

    in reply to: Smeg uk #293188
    subs
    Participant

    Re: Smeg uk

    Thanks Rogue!

    in reply to: Diplomat ADP8902 #293021
    subs
    Participant

    Re: Diplomat ADP8902

    Forgot to mention its a Smeg Dishwasher!

    Subs

    in reply to: Zanussi No Spin #292715
    subs
    Participant

    Re: Zanussi No Spin

    New timer module from EMW cured problem!

    Thanks for input.

    Subs

    in reply to: Bosch SGV53EO3GB/50 #292878
    subs
    Participant

    Re: Bosch SGV53EO3GB/50

    Who’s been buggering tranny’s?

    Sorry couldn’t resist it!

    Subs

    in reply to: Whirlpool Side by Side Sensors #292860
    subs
    Participant

    Re: Whirlpool Side by Side Sensors

    So i take it that the sensor can be used for fridge or freezer!

    Thanks

    Subs

    in reply to: Whirpool oven stuck on “STOP” #292863
    subs
    Participant

    Re: Whirpool oven stuck on “STOP”

    Thanks guys!

    Subs

    in reply to: Zanussi No Spin #292712
    subs
    Participant

    Re: Zanussi No Spin

    This did cross my mind but it tumbles and distributes normally every time.

    Subs

    in reply to: Whirlpool Side by Side #292414
    subs
    Participant

    Re: Whirlpool Side by Side

    Replaced board, both sensors show correct readings, baffle working, defrost system working, evaporator fully frosted, evaporator fan working, condensor fan working, condensor clean, yet fridge will only get down to 8-10c .

    Any other ideas please!

    Subs

    in reply to: Zanussi Thermal cut out #290637
    subs
    Participant

    Re: Zanussi Thermal cut out

    Thanks Chris, ill give that a try!

    in reply to: Ariston oven lamp cover #290630
    subs
    Participant

    Re: Ariston oven lamp cover

    Thanks Chris!

Viewing 15 posts - 226 through 240 (of 410 total)