subs

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 410 total)
1 2 3 … 7 8 9 … 26 27 28
  • Author
    Posts
  • August 9, 2011 at 10:20 pm in reply to: Old Hoover Washer Dryer Surpressor #357001
    subs
    Participant

    Re: Old Hoover Washer Dryer Surpressor

    I can’t find any “standard pattern surpressors”. Connect do an Electrue part version of this surpressor but that is also obselete.
    Do you have any examples please Martin.
    Thanks

    Subs

    July 26, 2011 at 1:34 pm in reply to: Teka intergrated dishwasher #355964
    subs
    Participant

    Re: Teka intergrated dishwasher

    The reset seems to have worked!
    Thanks

    Subs

    July 24, 2011 at 9:21 pm in reply to: Teka intergrated dishwasher #355962
    subs
    Participant

    Re: Teka intergrated dishwasher

    Any ideas??
    Please!!

    Subs

    July 22, 2011 at 4:17 pm in reply to: Teka intergrated dishwasher #355961
    subs
    Participant

    Re: Teka intergrated dishwasher

    Oops!
    Temp sensor fault is 3rd flashing 5th lit. I read this as 3 flashing 5th lit.
    That’s the error indication it is showing….First 3 lights flashing and 5th lit.
    Can’t find this error, although customer said he looked up and found it to be “Flow metre detected when not fitted reset” In my book this is indicated by just the first 3 lights flashing.
    Thanks
    Subs

    July 15, 2011 at 11:53 am in reply to: Lomona oven? #338434
    subs
    Participant

    Re: Lomona oven?

    It was a while back, but I don’t recall having any problems. I can’t remember the job so there is a slim chance I didn’t even do it in the end.
    Sorry not very helpful I know!!

    Subs

    June 30, 2011 at 3:34 pm in reply to: Who makes “Gunkol” ovens #354538
    subs
    Participant

    Re: Who makes "Gunkol" ovens

    Thanks!
    It’s the main thermostat I need.

    Subs

    June 13, 2011 at 9:49 am in reply to: Lamona intergrated washer from Howdens #353489
    subs
    Participant

    Re: Lamona intergrated washer from Howdens

    That’s strange!
    You were the first guys I phoned with the model number but was told you don’t do that one.
    I thought it may have been a Hoover because I recognised the interlock as a Hoover.
    I’ll give it another try with the part number.
    Thanks
    Subs

    June 5, 2011 at 9:28 pm in reply to: Samsung RS21 Fault? #352638
    subs
    Participant

    Re: Samsung RS21 Fault?

    Thanks for replies.
    This fridge does’nt have an ice maker.I spoke to the customer who said the fridge has been working fine for the past few days.
    Before the fridge origionally shut down and defrosted they said it got noisy and the noise would stop when you opened the door. Im wondering that as it had the common ice build up around fan problem, if it could have frozen the fridge sensor causing the resistence reading to go out of range and throwing up the sensor fault code and shutting down the fridge. Can this happen? Just guessing!

    Subs

    March 7, 2011 at 11:24 pm in reply to: Lux Stat #346393
    subs
    Participant

    Re: Lux Stat

    Anyone please??
    I replaced the grill element on this oven and this little cut out/ cooling fan cycling stat (i think) fell apart as it was held on by the nut that screws onto the stud of the grill element. I cant find any description of it anywhere.

    Subs

    February 17, 2011 at 7:18 pm in reply to: Diplomat Dishwasher? #344684
    subs
    Participant

    Re: Diplomat Dishwasher?

    Thanks!

    February 17, 2011 at 7:16 pm in reply to: Arrow Oven? #344687
    subs
    Participant

    Re: Arrow Oven?

    Cheers guys!

    February 10, 2011 at 3:45 pm in reply to: Diplomat oven hinges #344200
    subs
    Participant

    Re: Diplomat oven hinges

    Thanks Andy.
    I think I may need the part that’s located in the door too.
    Can anyone give me some info on replacing these before I go back?
    Do I have to remove the side panels to get the hinge bar out. As I said they don’t seem to lift out. I only had time for a quick look when I was there.
    Thanks

    Subs

    February 3, 2011 at 11:33 pm in reply to: Hotpoint DW Fault #342716
    subs
    Participant

    Re: Hotpoint DW Fault

    Thanks for the info Jim!

    Subs

    January 27, 2011 at 3:28 pm in reply to: whirlpool american f/f icing up in freezer #342640
    subs
    Participant

    Re: whirlpool american f/f icing up in freezer

    Hi,
    In my experience with these ff’s, if the heater and thermal fuse is ok and it keeps icing up then a new rear board is needed.

    Subs

    January 14, 2011 at 2:20 pm in reply to: Whirlpool Side by Side FF #340719
    subs
    Participant

    Re: Whirlpool Side by Side FF

    Mmmmm! Thought this would have been straight forward.
    It’s been documented on here in the past about wether to change one or both boards depending on the date code. The problem is that I have seen different opinions on what this date is. In the past I’ve always gone by anything after 110330 which is 2003 week 30 only the one board needs replacing. Before that date both need to be replaced. It’s just that I’ve never had to change one on anything older than a 2004 model.
    Anyone know the correct date for sure?

    Thanks

    Subs

  • Author
    Posts
Viewing 15 posts - 106 through 120 (of 410 total)
1 2 3 … 7 8 9 … 26 27 28