subs

Forum Replies Created

Viewing 15 posts - 91 through 105 (of 410 total)
1 2 3 … 6 7 8 … 26 27 28
  • Author
    Posts
  • February 28, 2012 at 1:38 pm in reply to: AEG Dishwasher New PC Board Faulty? #369949
    subs
    Participant

    Re: AEG Dishwasher New PC Board Faulty?

    Hi Colin thanks for the reply.
    I’m not sure what you mean about the connections “A1 and A2. This board has connections marked A1 which is the main power supply then 1b, 1c, 1d, 1e, 1f and 1g. I did notice that connection A1 had the location slots the other way around to the origional board so the plug had to be plugged in the other way around too. The board is slightly longer than the origional too.

    Thanks

    subs

    February 6, 2012 at 11:57 pm in reply to: AEG Dishwasher Module #368398
    subs
    Participant

    Re: AEG Dishwasher Module

    Thanks!! 😀

    January 30, 2012 at 11:01 pm in reply to: Lux Built In Microwave…No Heat. #363831
    subs
    Participant

    Re: Lux Built In Microwave…No Heat.

    Thanks, that site had just what i needed! 😀

    January 17, 2012 at 11:29 pm in reply to: What’s the most stupid things customers say? #363919
    subs
    Participant

    Re: What’s the most stupid things customers say?

    Had this one today when discussing the possible causes of a guys fridge freezer problem:
    “It could be something to do with the gas” i said.
    “No it can’t be anything to do with the gas mate, i’ve just had a brand new boiler and central heating system fitted!”

    Donut!!

    January 17, 2012 at 11:06 pm in reply to: Lux Built In Microwave…No Heat. #363829
    subs
    Participant

    Re: Lux Built In Microwave…No Heat.

    Took a while to get around to looking at this one. It has a shorted high voltage capacitor. Now seeing as the capacitor for this is special order from connect and is around £50 i was wondering if i can use another of simillar rating or does it have to be exact? For example the capacitor is a 2100VAC 1.02uf and ive seen one for less than half the price which is 2300VAC 1.07uf. Or does anyone know where i can buy the correct rated cap for less?

    Thanks

    Subs

    January 10, 2012 at 1:18 pm in reply to: Hotpoint heating element #366950
    subs
    Participant

    Re: Hotpoint heating element

    Thanks Martin!

    November 17, 2011 at 8:00 pm in reply to: Lamona Dishwasher Circulation Pump #363814
    subs
    Participant

    Re: Lamona Dishwasher Circulation Pump

    Thanks 😀

    November 17, 2011 at 7:51 pm in reply to: AEG Dishwasher error i60 #362336
    subs
    Participant

    Re: AEG Dishwasher error i60

    Replaced the ntc on this but customer says it is still throwing up error mid cycle and then draining. It is heating. Apparently its not doing it on the cooler washes ie 55 degrees.
    Any thoughts on this please?

    Subs

    November 17, 2011 at 7:40 pm in reply to: Lux Built In Microwave…No Heat. #363828
    subs
    Participant

    Re: Lux Built In Microwave…No Heat.

    Thanks Bob, i’ll check that out.

    October 27, 2011 at 11:14 am in reply to: AEG Dishwasher Sensor #362340
    subs
    Participant

    Re: AEG Dishwasher Sensor

    Thanks Martin!

    October 27, 2011 at 11:11 am in reply to: Indesit bearings change #362334
    subs
    Participant

    Re: Indesit bearings change

    It’s the ally spider. I thought it was a straight forward remove spider job but it was the bearing kit with all the bits and pieces that confused me.

    Subs

    October 5, 2011 at 11:05 pm in reply to: Kenwood Table Top Dishwasher “E r 4” #360724
    subs
    Participant

    Re: Kenwood Table Top Dishwasher "E r 4"

    Are you suggesting I set fire to it?

    Subs

    August 31, 2011 at 9:44 pm in reply to: Aeg Dishwasher fan motor unit? #358065
    subs
    Participant

    Re: Aeg Dishwasher fan motor unit?

    Thanks!!

    August 17, 2011 at 10:10 pm in reply to: Old Hoover Washer Dryer Surpressor #357003
    subs
    Participant

    Re: Old Hoover Washer Dryer Surpressor

    Thanks Martin!!

    August 17, 2011 at 10:08 pm in reply to: AEG Freezer Stat #356761
    subs
    Participant

    Re: AEG Freezer Stat

    Thanks!!!

  • Author
    Posts
Viewing 15 posts - 91 through 105 (of 410 total)
1 2 3 … 6 7 8 … 26 27 28