Forum Replies Created
-
AuthorPosts
-
suedehead1
ParticipantRe: hoover hed6612 dishwasher
thanks i will give it a try
suedehead1
ParticipantRe: Hoover Candy Work
i was waiting for a plethora of sarcastic comments here with many whitegooders having had bad experiences with hoover work in the past,
i have always beeen a supporter of the hoover product so i sent off an email expressing intrest,
imagine my disapointment when they did not even have the decency to acknowledge the receipt of the email.suedehead1
ParticipantRe: Bosch D/W dead.
thanks i will try a pcb.
suedehead1
ParticipantRe: Bosch D/W dead.
how did you get on with this one i have a dead bosch same idea with the switch.
December 8, 2011 at 11:43 pm in reply to: Hoover washer PE235 01 selector knob keeps clicking forward #365160suedehead1
ParticipantRe: Hoover washer PE235 01 selector knob keeps clicking forw
its normally the timer thats faulty,
suedehead1
ParticipantRe: hoover vhv381 dryer
that was quick thanks very much
suedehead1
ParticipantRe: Hoover OPH614-80
all these oph models have the selector mounted on the board,
it means instead of a fiver fo a new selector and you do a repair
or 50 quid and the customer struggles along with it.suedehead1
ParticipantRe: Hoover HP6 120M overfill??
i have replaced a couple of pressure switches for the same fault.
November 20, 2011 at 11:07 am in reply to: Hoover logic washer dryer cold inlet triple valve #363995suedehead1
ParticipantRe: Hoover logic washer dryer cold inlet triple valve
connect have triple valves pattern and genuine for the hotpoint washer dryer which wouls suit just make sure that the dryer valve is in the same place.
suedehead1
ParticipantRe: Baumatic BDW2SS
5031680980936
suedehead1
ParticipantRe: zanussi ZWF1221W
DOH!
I never thought about that thanks very much i feel a bit of an idiot, not for the first time.suedehead1
ParticipantRe: Twin Tub Virgin – 9404W
RocketMan wrote:
old lady says it doesn’t work or make any noise when she tries to use it’t and so it doesn’t get rid of the water. …i think you are off on the wrong track,
if it isnt making any noise then i would suggest the rocker switch for the spinner lid is faulty or needing adjusted ,
back panel off, look for a white rocker switch with 2 wires going to it. check the switch operation or bypass it temporarily to try it,
even if the spin can was seized it would still empty the water away.suedehead1
ParticipantRe: servis m3059 door handle
Thanks.
suedehead1
ParticipantRe: siemans wm16s493
i would be blowing down that pressure switch tube first if it was me.
suedehead1
ParticipantRe: siemans wm16s493
could be a blocked pressure switch tube or faulty pressure switch.
-
AuthorPosts
