Forum Replies Created
-
AuthorPosts
-
superfix
ParticipantRe: BOSCH WFL2260UK/01 w/m
Did you remember to plug the door lock back in I wonder 😳
superfix
ParticipantRe: Bosch D/Washer SRS56A02CB/13
have you checked the suppressor?.
Have had a few now with a smell of burning, along with tripping the rcd.
superfix
ParticipantRe: AEG F86070VI dishwasher 10 error
had to go; Chelsea kicking off…………… Shocked
Any advice would be appreciated.
Yeah drop Carvalho, and Geremi is no right back 😆
As for the d/w aint got a clue mate.
superfix
ParticipantRe: Bosch burning!
I would love to know if anyone has had a similar experience with this model?
Not me Martin, had no bother at all with pcb on this m/c. Only with duff display module.
February 10, 2006 at 7:47 pm in reply to: Bosch WVF2402EE Classixx washing machine and dryer leaking. #164051superfix
ParticipantRe: Bosch WVF2402EE Classixx washing machine and dryer leaki
Nah Greg, probably means the little air break doofer for the condenser.
It is normal for water to flow through this on dry cycle. And no there isn’t meant to be a valve in the hole, that is normal.
To be honest if you can’t trace the leak yourself, then it’s engineer time.
superfix
ParticipantRe: Have you seen Bungle’s twanger???
😳 😳 😳 Double post sorry 😳 😳 😳
superfix
ParticipantRe: Siemens SE24A230gb/17 FD8204
Martin wrote:It can only be a seriously corrupted module that needs replacing I would think? The trouble is I would not risk simply replacing it without checking out all the other components first. 😉
I suspect if you inspect the module board there will be some physical damage on view somewhere? And that will be a risky business plugging in a new Module for it to go BANG!
It’s well out of guarantee now as well, so you cannot refer it to Siemens either.:(
Agreed.
superfix
ParticipantRe: bosch kgv3104gb/03 fridge freezer
http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewtopic&t=5129
Still think it could be an ambient problem though.superfix
ParticipantRe: Bosch Fridge Freezer Error Code E2 – Please Help!
Without E-nr hard to be specific. 🙄
Am guessing it’s a kgu3201 or something similar. If so E2 means you need a new pcb probably, 263782.
As I say guess work without E-nr. remove left hand salad bin, should be sticker located there with E-nr on.
superfix
ParticipantRe: Kuppersbusch built-under hinge problem
Oooooh nasty job.
Might be best to get an engineer in.
February 5, 2006 at 8:22 pm in reply to: Bosch SPS6432GB waste blocked – unblocked + won’t restart #163406superfix
ParticipantRe: Bosch SPS6432GB waste blocked – unblocked + won’t restar
Yeah Greg’s right there is an aqaustop on it.
Pressing the hottest wash and prerinse together will advance the prog to the end.
If you’ve got the water out of the base, and still no joy, then I would suggest it’s engineer time.
superfix
ParticipantRe: Bosch WFT2800 Wets Clothes as it “Dries”!
It’s either a bra wire or other such foreign object stopping the eco-ball sealing up, or a problem with the quad valve sticking and letting too much water in at the end of the dry cycle.
Quad valve sounds more likely given that you say it all seems dry with 15 minutes left.
superfix
ParticipantRe: Humans: Inefficient Walkers
Yer joking aren’t ya.
I though Souey was doing a fantastic job 😆
Think I’ll apply for the job. Gimme two years to ruin the barcodes.
superfix
ParticipantRe: bosch kgv3104gb/03 fridge freezer
This model is affected by ambient temp problems, no seperate stat for freezer just works off the fridge stat.
Will tell you in the instruction manual suitable temp for m/c. :lesson:
Would defo advise checking the ambient first.
superfix
ParticipantRe: Getting old
Blimey everyone sounds like an old fart on this thread 😆
Still listen to Radio one meself (most of the time) but the BSH combo comes with a CD player now 😀 so alot of the time now is spent hunting round the passenger footwell for CD’s.
Agree with the Mark and Lard comments though they were fantastic it was a sad day when they left 😥
-
AuthorPosts
