SWERV

Forum Replies Created

Viewing 15 posts - 646 through 660 (of 743 total)
1 2 3 … 43 44 45 … 48 49 50
  • Author
    Posts
  • February 5, 2007 at 4:45 pm in reply to: Nebb oven FE4623ES #203257
    SWERV
    Participant

    Re: Nebb oven FE4623ES

    Cheers Andy, that’s what I expected.
    Regards
    Merv

    January 17, 2007 at 8:15 pm in reply to: New world 50ESO #201174
    SWERV
    Participant

    Re: New world 50ESO

    Thanks very much.
    Merv

    January 17, 2007 at 4:05 pm in reply to: Brandt Freezer #201012
    SWERV
    Participant

    Re: Brandt Freezer

    Thanks simon….we have the new clips but the originals were heat bonded to the liner so we’re trying to work out how to attach the replacements….

    January 3, 2007 at 9:26 am in reply to: Hygena APL8224/1 #199326
    SWERV
    Participant

    Re: Hygena APL8224/1

    Thanks Chris.
    Merv

    December 8, 2006 at 2:31 pm in reply to: Nebb FE8622EX #197289
    SWERV
    Participant

    Re: Nebb FE8622EX

    Thanks very much guys 😀 .
    Merv

    November 12, 2006 at 6:58 pm in reply to: Diplomat ADP5515 #194992
    SWERV
    Participant

    Re: Diplomat ADP5515

    Thanks Chris.
    Regards
    Merv

    October 26, 2006 at 12:03 pm in reply to: blomberg 1100AW #193448
    SWERV
    Participant

    Re: blomberg 1100AW

    Thanks Andy.
    Merv

    October 25, 2006 at 6:01 pm in reply to: Connect #193349
    SWERV
    Participant

    Re: Connect

    Yes, you are not alone.
    Merv

    October 25, 2006 at 10:51 am in reply to: panasonic microwave fault codes #192923
    SWERV
    Participant

    Re: panasonic microwave fault codes

    Hi, unfortunately panasonic does not have the service manual for this model on their website anymore, but according to the manual for the NE993 FFFF Appears in the display on convection, grill or combination cooking.
    Check continuity of the oven temp. sensor(if 0ohm or open crcuit) replace sensor, or it will be a faulty dpc.
    The chances are that the sensor is nla.
    Hope that helps 😕
    Merv

    October 24, 2006 at 6:14 pm in reply to: Halifax/ Bank of Scotland stopping free business banking #193187
    SWERV
    Participant

    Re: halifax/ Bank of Scotland stopping free buisiness bankin

    18 months actually.
    Merv

    October 21, 2006 at 8:58 pm in reply to: panasonic microwave fault codes #192921
    SWERV
    Participant

    Re: panasonic microwave fault codes

    I won’t be able to get the fault code till monday but, if my memory serves me correctly, it should be a temp sensor fault 😕 .
    Merv

    October 19, 2006 at 10:50 pm in reply to: Neff d/w #192739
    SWERV
    Participant

    Re: Neff d/w

    Hi Greg, the model no. is S4840X0GB/06.
    Merv

    October 8, 2006 at 3:33 pm in reply to: VAX 5140 Rapide #191078
    SWERV
    Participant

    Re: VAX 5140 Rapide

    It will 99.9{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} be a faulty pump, depending on the actual model, and the type of pump fitted approx cost £25 for pump.
    Merv

    October 6, 2006 at 10:28 pm in reply to: Diplomat ADP8112 #190061
    SWERV
    Participant

    Re: Diplomat ADP8112

    Thanks Dave, I thought it was a smeg pt. no. but the number Chris gave, Smeg didn’t recognise.
    Merv

    October 6, 2006 at 9:54 pm in reply to: Diplomat ADP8112 #190059
    SWERV
    Participant

    Re: Diplomat ADP8112

    Hi Chris, is this a smeg part no. ?
    Merv

  • Author
    Posts
Viewing 15 posts - 646 through 660 (of 743 total)
1 2 3 … 43 44 45 … 48 49 50