Forum Replies Created
-
AuthorPosts
-
SWERV
ParticipantRe: Stoves 720ef
Thanks Dave, I’ll check with the customer.
Regards
MervSWERV
ParticipantRe: A Warning
I made that mistake once , but never again I hope. I was working on a built under D/ oven, switched the power off and the clock went off, so I thought that was it. Had my hand in the back of the cooker and got an almighty shock. It turned out, the wiring to the back of the cooker was dodgy, although that wasn’t the fault I was there to rectify. It was just pure coincidence that the clock went off when I turned a switch off.
MervSWERV
ParticipantRe: Neff w/d V4380XOGB/13 FD 7709
Thanks for the e-mail Greg.
MervSWERV
ParticipantRe: Neff w/d V4380XOGB/13 FD 7709
Hi Greg, I put it on a wash and left it while I was drinking my coffee and went back to it, there was certainly no supply to the heater.
MervSWERV
ParticipantRe: Neff w/d V4380XOGB/13 FD 7709
I know it’s hard to believe, but it’s actually a friends machine which was surplus to requirements when they were building a set of houses.
It does agitate on rinse, but thats all it seems to do after it has filled.
When put onto a main wash, it fills then stops ( no drum action). if you put it on spin it will drain then go into spin.
I was wondering if there was a way of reseting it, but there was nothing in the instruction book.
It’s always the same story, never easy when it’s for a friend!
MervSWERV
ParticipantRe: leisure 110DF
Just to let you know I have sorted this out now. Has anyone seen the new partscenter web site? They have changed Identifier to the parts arena with quite a few new additions including manufacturers part no’s.
MervSWERV
ParticipantRe: leisure 110DF
Any info would be very gratefully appreciated.
Regards
MervSWERV
ParticipantRe: Diplomat ADP8112
Thanks Chris 😀 .
MervSWERV
ParticipantRe: do electrue care
I’ve received a few parts that are incorrect in the last few months, and as always it is an absolute nightmare to return them!. Countless e-mails and telephone calls and nobody ever seems to get back to you. I have now been waiting three – four weeks to try and send a part back but have had no response.
I really feel like going back to using partscenter, at least they have a rep that comes and visits.
MervSWERV
ParticipantRe: Bosch integrated f/f
Thanks for your help Gegsy.
MervSWERV
ParticipantRe: Sharp m/w turntable support/coupler
Roller stay pt. no. FROLPA070WRK3.
Regards
MervSWERV
ParticipantRe: Bosch integrated f/f
Just wondering if anyone had any idea’s, before I have to get back to the letting agent.
Thanks
MervSWERV
ParticipantRe: Hotpoint t/t 9404
I’m sure I’ve done the same in the last couple of years! 😳
MervSWERV
ParticipantRe: Hotpoint t/t 9404
Thanks Iadom, I’ve already tried them , but they’re both obselete
MervSWERV
ParticipantRe: Hotpoint t/t 9404
Hi, I’ve tried partscenter, connect and Cds but they’ve all said obselete :cry:.
Merv -
AuthorPosts
