Forum Replies Created
-
Posts
-
Re: worst thing
Pair of surgeons scissors wedged in heater assy. Complained of machine rattling, I wonder why 😯
Steve
Re: Whirlpool AWZ241 TD
johnmac11 wrote:481235818162 has now been superseded by 481235818186
John
I can see it now 😳
Re: Whirlpool AWZ241 TD
Hi there
I think you will find it should be a 1965-h7, Whirlpool no. 481235818162 (thats if I have the right service no.)
Steve
Re: Hotpoint Con/Tum/Dryer
Hi there
Sounds like relay behind control panel to me. Pt no 1701624
Dave can probably help you out with one.
Steve
Re: Zanussi WD19091
Thanks chaps
I was just a bit mythed when I peered through top plate and saw no usual set up with fan etc, and then look at on TDS and find no fanblower etc just a heater dangling in mid air! No different to standard fault finding on normal washer dryers then :tup: I was just a bit loathed to pull it as it looks a cow of a job. You know how it is rented property landord not quite sure of fault description etc.
Thanks for info
SteveRe: Tricity element
Dave_Conway wrote:ELE3699 is still available from Connect but they are obviously old stock and of no use to anyone by the sounds of it.
Dave.Hit the Nail on the head Dave, 1994!
I could well be in touch, thanks all for your help.
Steve
Re: Zanussi DE 6850 dishwasher fault
Hi
There is actually a 16 min test routine for this machine, PM with e mail address and and pickies may appear 😉 no heat should produce an error code.
Steve
Re: hpt 8596p no evap fan
Was It problems with the black evaporator thermistors on these, and the green ones ok? or vice versa.
Steve
Re: hpt 8596p no evap fan
Hi Paul
Is the condenser free from dog hairs/dust etc, these were prone to getting clogged up and resticting cooling, giving warm fridge tempratures.
As your DVD states the early condenser cooling fan had problems with fan/motor (started to run a bit sluggish and impede cooling of condenser). Cant remember if fan runs straight away or when evaporater temp drops a bit, been a while since ive seen one.
Steve
Re: Rangemaster 110- Intermittent Fan Fault
Hi Tubby
Yes I am afraid it is. In my experience of stripping them down and oiling them, they dont tend to last very long (heat soon drys out oil). so I tend to fit new one now and forget the messing about.
Spares on this site should be able to source you one.
Unplug/disconnect before going in :zap:
regards Steve
Re: Tricity/Bendix AW1400W
Hi
Did you notice how many times end led flashed? this led is used for first digit of error code. second alarm code is denoted by start/pause led.
Quick accsess to error code is press and hold in start/pasuse button and any option button together for 2 secs while machine is running. The alarm is shown buy these leds as long as the buttons are held down.
Have error codes if required.steve
