[Tubs]

Re: Whirlpool AWM8123

Hi Sparkyp,

Just an 💡

Have you checked heating element for low insulation?

Had similar fault with Zanussi once. Done everything except spin 😕

steve

[Tubs]

Re: Whirlpool AWM8123

Hi Sparkyp,

I know you say display shows a time but do any of the spin speed leds flash?, this model uses them for error codes. Test routine on Sios Cd 💡 .

I Only ever seem to have pressure stat chamber probs with this machine.

Steve

[Tubs]

Re: anyone for tenious?

Goatboy wrote:Once I saw Jim Bowen! It’s true!

Bully for you 😆

[Tubs]

Re: Homark fan oven element

Thanks chaps

Tried genuine pt no with connect, yes they do stock it 😮

Thanks for help

Steve

[Tubs]

Re: TDS offline DVD 2005

And there’s no technical reason that I can see why they cannot use the installed version of Acrobat Reader

We ticked/unticked every appropriate box in the Adobe 7 settings, to try and fire the old girl into life. But Still no joy 🙁

steve

[Tubs]

Re: Whirlpool AWZ241 TD

Hi iadom

If you have Sios cd there is a test program for this dryer you can access.

Tried to cut & paste but it dont work 🙁

Hope this helps

Steve

[Tubs]

Re: Smeg DVD

Never seen this before, last time I enquired about Smeg technical info was told it was for selected service agents only. Is this correct?

Tubs

[Tubs]

Re: TDS offline DVD 2005

Hi all

Hooray

I have picys to look again 😮 . Unistalled Adobe 7 put 5 back on and BINGO 😮

I love you all 😀 😀 😀 , thanks for info

Steve

[Tubs]

Re: hotpoint ff72s

Hi Tony

Had this before, its a PINTA.

Check the seal on the baffle control housing at the rear wall/ceiling of fridge and also round the cable entry holes.

If the seal is poor cold air passes directly onto the thermistor when the baffle is open. This causes baffle to close too early giving warmer fridge temp than actually set!

Steve

[Tubs]

Re: Panasonic microwaves nna754w, nna755w, and 883w

Hi

have looked at Panasonic info for you, and of what I can see the NNA755 does not exist 🙁 (not listed in tech library). I think Panasonic are correct in what they say.

As for the 883 looking at documentation and parts list for this, it appears not to have shelves (cant see any in the parts list ❓ ), if it does they are well hidden.

Hope this helps

Tubs

[Tubs]

Re: TDS offline DVD 2005

Hi Dave

Tried that still no joy 😥 ,possibly something to do with firewall settings?

Got I.T friend on the case now. Will post all if any joy.

Steve

[Tubs]

Re: Missed This One

Still not enough machines to make one good one 😆

[Tubs]

Re: TDS offline DVD 2005

Thanks Paul,

will give that a go. Its a great DVD but always seems to be a pain to get the B****y thing working. Had trouble with 2004 if I remember rightly. Even tried re installing it, still no joy 🙁

Steve

[Tubs]

Re: Hpt DF62 d/w

Hi Chris

Have you checked breather vent on soap dispenser. if its the one im thinking of. Changed dispensor on one of these once without plastic cut out being removed, water every :cry:. something to do with balancing pressure inside wash compartment, takes in too much water.. sounds mad but worth checking. Put old dispensor back on problem solved 😮

Tubs

Penguin45 wrote:]Calm down dears, its only an enquiry……..

So a fruitless couple of hours in the workshop later………. Another new lower gasket fitted (Water now fountains out of the rh corner – spectacular but of little practical use.) Clipping down the tub edge of the seal has slowed things a bit. Have tried several different botton rotors both straight and “S” shaped and swapped the pressure set-up. Setting the main body seal forward slightly to increase contact has made no difference. I might swap the inner door panel just to get the set…….. 🙄

Any of you Bosch chaps got any thoughts on this?

Cheers,
Chris.

[Author]

Posts