Washman

Forum Replies Created

Viewing 15 posts - 826 through 840 (of 894 total)
  • Author
    Posts
  • in reply to: servis #147695
    Washman
    Participant

    Re: servis

    Hi all

    Have just cured one by changing the heater. some times it would spin some times not .disconnected heater and away it went into full spin.
    Very small earth fault in heater causing problem on PCB.

    Mike

    in reply to: Bosch inlet valve banging #147579
    Washman
    Participant

    Re: Bosch inlet valve banging

    Hi

    Full Enr number please

    It sounds to me as if your water pressure is to high and causes water level switch to switch on and off try lowering water pressure to machine.

    Mike

    in reply to: Moffat 4633 oven elements 25yrs old? big things #146347
    Washman
    Participant

    Re: Moffat 4633 oven elements 25yrs old? big things

    Hi

    ELE3992 on Connections looks Ok £3.89 trade

    Still shows at this price for me on connections have just had a look 16/09/05.
    The online version of Connections is the one to use, as you do not have to keep down loading the updates.on line version always has updated info, DVD stops working with some features if you do not order enough through out the month.

    Mike

    in reply to: Servis M6011 belt size? #147353
    Washman
    Participant

    Re: Servis M6011 belt size?

    Hi

    Part no SER416003900 £11.25 trade on Connections

    Mike

    in reply to: Beko Cooker Thermostat #147367
    Washman
    Participant

    Re: Beko Cooker Thermostat

    Hi

    Part no BEK363900002 about £6.59 trade on connections

    Mike

    in reply to: Servis M6055 #146943
    Washman
    Participant

    Re: Servis M6055

    HI

    Are you sure it’s a Servis M6055 as it’s not showing up on the service manual list

    Mike

    in reply to: late hotpoint w/d #146587
    Washman
    Participant

    Re: late hotpoint w/d

    Hi

    I have found it better to change both door handle and interlock on Servis machines

    Mike

    in reply to: Hotpoint DWF 30 #146443
    Washman
    Participant

    Re: Hotpoint DWF 30

    Hi

    By small amount of water is it above or below the filter , Water below the filter is normal.

    Mike

    in reply to: dishwasher salt cloudy dishes? #146569
    Washman
    Participant

    Re: dishwasher salt cloudy dishes?

    Hi

    When you fill the salt container do you clean away all salt from the filler cap. As it sounds as though the cap is not sealing and the salt is being washed out of container during the wash cycle . If you are in a soft water area you probibly don’t need to use salt, and don’t use 3in1 or 4in 1 tablets ,use individual powder and rinse aid.

    in reply to: Moffat 4633 oven elements 25yrs old? big things #146334
    Washman
    Participant

    Re: Moffat 4633 oven elements 25yrs old? big things

    Hi

    ELE3992 on Connections looks Ok £3.89 trade

    Mike

    [/img]

    in reply to: Is WashVac’s site down? #136918
    Washman
    Participant

    Re: Is WashVac’s site down?

    Hi all

    Washvac.com has finally dissappeared 31/08/05 have just tried it , and it comes with site cannot be found .

    Mike

    in reply to: Hotpoint FZ60A- Temperature Control #145447
    Washman
    Participant

    Re: Hotpoint FZ60A- Temperature Control

    Hi
    When you switch any refrigeration appliance off , you should leave it for at least 10mins before switching on again as the compressor will not start until start device has cooled down and pressures in system have equalised.

    Mike

    in reply to: servis M3814AL – motor doesn’t turn #145902
    Washman
    Participant

    Re: servis M3814AL – motor doesn’t turn

    Hi Paul

    Replacement motor about £ 150.00 +
    replacement PCB about £100.00
    so you realy need an engineer
    It ‘s most likely the PCB thats causing fault , so you need to be sure of diagnosis first

    Mike

    in reply to: FREEZER DRAWS REQUIRED FOR BOSCH MODEL NO KGV2822 #145853
    Washman
    Participant

    Re: FREEZER DRAWS REQUIRED FOR BOSCH MODEL NO KGV2822

    Hi

    Have you tried BSH APPLIANCE CARE who are the BOSCH spares distributors on 08705 543210
    Or just click on this link http://www.bshappliancecare.co.uk

    Mike

    in reply to: WASH-VAC SITE 24/08/05 #145744
    Washman
    Participant

    Re: WASH-VAC SITE 24/08/05

    Hi all

    It took years to build up the business that Wash-vac had, but has taken weeks to destroy it .

    Mike

Viewing 15 posts - 826 through 840 (of 894 total)