Forum Replies Created
-
AuthorPosts
-
whiskey_six
ParticipantRe: Samsung RS21JLBG
part number should be on the pcb
whiskey_six
ParticipantRe: Diplomat Dishwasher?
user board for this model is 481221838043 8)
whiskey_six
ParticipantRe: hoover vhd 8142 bearing change
only by a few seconds mate 😉
whiskey_six
ParticipantRe: hoover vhd 8142 bearing change
No, the tub is complete ( 41022795 ), about £100
whiskey_six
ParticipantRe: Hotpoint WMF760
Yes, it does
DEMO MODE
To Activate Demo Mode
Press and hold the following buttons simultaneously (for approximately 20 seconds): –
ON/OFF BUTTON
SUPERWASH
START / PAUSETo De-select Demo Mode
Press and hold the following buttons simultaneously (for approximately 20 seconds): –
ON/OFF BUTTON
START / PAUSE
8)whiskey_six
ParticipantRe: You’ve gotta give it to D&G
Im sure some service engineer will find out pretty soon 😆
whiskey_six
ParticipantRe: HPT FF92 PCB
Already configured but two versions depending on date code and they are not interchangable. Got a problem with my pc at the moment otherwise would send you the service manual detailing the pcb’s. Maybe someone else can help
whiskey_six
ParticipantRe: Hotpoint?Indesit fill valves??
Hotpoint got a delivery 31/12/10 and arrived with us 4/1/11. We got told parts had come from Poland and even hotpoint engineers had been waiting due to the amount of valves bursting. We had a massive backlog and so did merloni so there own engineers must have been given priority.
whiskey_six
ParticipantRe: Candy Washing Machine CM462-80 will not start
There are 3 types depending on shaft colour. Yours is the 22 position selector which is the common one to break down and has an orange shaft.
Part numbers are as follows
41014503 – 22 position – orange shaft
41014502 – 16 position – white shaft
41028011 – 12 position – purple shaft
They all give problems. 😉whiskey_six
ParticipantRe: beko wme8227w main module
As far as I know, it’s only Beko that supply the part. Part number is 2822822370 and cost price to trade is around £30
whiskey_six
ParticipantRe: Comet
The full story is now reaching the trade mags.
http://www.retail-week.com/news-by-topi … 18.article
As was said, the service engineers are not affected apart from they no longer have an office to go into each morningwhiskey_six
ParticipantRe: K24PU cooker hood (no name)
It’s made by Smeg but you may have trouble getting parts for it as they don’t stock much for this model in the UK. It’s from the omega range and was produced for the Australian market. Did notice on google that you can get a pcb from Australia for about $130 dollers (Australian). Nothing on Smegs UK website.
whiskey_six
ParticipantRe: hotpoint 17221 dryer
BIT VAGUE ON HOTPOINT WEB SITE BUT POSITION 18 ( TOP HINGE ) HAS TWO LISTED AND 19 ( BTM HINGE HAS 2 )
C00175872 – BTM HINGE WHITE
C00175900 – BTM HINGE
C00175871 – TOP HINGE
C00175899 – TOP HINGEwhiskey_six
ParticipantRe: Stoves Newhome Door/Glass
LISTED ON THE CONNECT SITE AS OBSOLETE MATE (STV012263446)
You could give Stoves trade spares a ring (GLEN DIMPLEX) on 08448153733 to confirm and see if a alternative is available, all they need off you is the 05 PRODUCT NUMBER.whiskey_six
ParticipantRe: teka HT590 1
The model is not listed on Connect but the HT610 is, looking at the picture of it, it has a thin shaft, that I take goes into the knob, the opposite end is a hell of a lot larger that attaches to the stat/switch, and in the middle is a circular cam disc which is shaped out on one side, made out of a yellow green nylon plastic material. Listed under PART number TEK03030145. Type in on googlepictures, same picture of it on BUYSPARES 8)
-
AuthorPosts
