Forum Replies Created
-
Posts
-
Re: Electrolux Double Oven EOG9330 – Oven Door is Loose
There is no adjustment on these doors, new hinges needed om afraid try
Shop@ on the left.wvm
Re: Drum support failure… Do I win a prize?
one new hotpoint tub support, plenty of acid rain, leave outside 1 month watch it rot.
obviouly the acid rain comes from outside wales 😆
Re: Error Code E51 and E50 on Zanussi WJS1265 W
no code for e50 but E51 suggests insulation on motor down, must of got this wet when cleaning pump assy.
WVM
Re: Hotpoint WD420P drying element not heating up
try shop@ if not im sure Dave Conway or kwattt will be able to help
wvm
Re: Neff Dishwasher S6409N3GB/19
Just a comment gents,
Recently had heater ass oc with this design, ordered part (complete assy)and fitted only to find out would not heat, would not heat due to microswitch fitted/suplied – when open sc / when closed oc.
WVM
Re: Hotpoint WD420P drying element not heating up
Mart-wood wrote:I have checked out the dryer element and it is getting a current through it but it just isn’t heating up.
Thanks
You say that it is getting current through it, I can assume you mean the heater is getting 230v ?
If this is so it would mean that the heater is faulty/ Is it open circuit ,
however I would never recommend you test live.
Hope this helps
WVM
Re: new indesit washer inst prob
Dave_Conway wrote:It’s pure coincidence I think, the ball valve washer has probably failed in the loft cistern.
Plumber required 😉
Dave.
Just a thought are they using now using a Y piece after hot/cold valve with one pipe to soap box, (SUK – had same problem and converted Y peice with non return valve).
Re: Regassing tumble dryers
Thanks for restoring my sanity, had a look at http://www.procorner
Compressor PART NO 112 54 20-00/8
@ 259,07euro £173,58 looks an expensive repairfunkyboogy dont think you will need a compressor where u live , just leave it outside.
Wayne
Re: Teba DF60SS oven/grill tripping electric when switched o
For indepth testing of this fault you would need specialist test equipment, It sounds that you have a earth leakage problem.
Suggest you call the experts in
contact Repairs@ to find someone near you .
wayne
Re: MFI DIPLOMAT OVEN
This peice of glass could of had a minute crack in the corner, since manufacture, and at the given moment when you opened the door the cold are would have met the hot glass and caused it to shatter.
Hope this helps
Re: Servis M3101A
used to work for these. that moat thing around the castle.
Common fault with these 3 edge modules not spinning , you could try dropping the motor to the bottom then replacing belt to create big tension
if spins okay, only problem is that enhances bearing fallure. otherwise replace module (there normally will be no evidence of pcb failure)hope thi helps
Wayne
Re: Fairy Active Bursts
had some also free, only problem boss has found is that they dont drop out of the dispenser and stick (got a zannusi dw24)
